Search results for 'case'
-
Case solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange for a sight glass, two mounting brackets, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two mounting brackets, and a 1/4" NPT flange for a drain fitting.
Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers. Learn More -
John Deere 540B Skidder solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection, two holes for the oil cooler (one on the grill side and one on the fan side), and a 1/4" NPT flange for a drain fitting on the grill side.
Note: oil cooler must be supplied by the customer.
Learn More -
John Deere Complete solder-on tank set
Top Tank
This tank has a 2" diameter hose connection 3" from the edge of the tank to the center of the hose connection, and a 1 3/8" diameter hole at the top of the tank for a fill neck.
Bottom Tank
This tank has a 2" diameter hose connection 7" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain cock.
Side Frames
These frames have three 3/8" NC threaded mounting nuts along the back of the frame, and eight 3/8" NC threaded mounting nuts along the fan/grill edge (three along one edge, and five along the opposite edge.
Learn More -
John Deere Loader
Top Tank
This tank has a 1 3/4" diameter hose connection 3" from the edge of the tank to the center of the hose connection, two "ears" for lifting the completed unit, and a 1 3/8" diameter hole on the top of the tank for the filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 5 plate 8" center oil cooler (to be provided by the customer), and a 1/4" NPT flange for a drain cock.
Learn More -
John Deere solder-on tank set
These tanks have 2 1/4" diameter hose connections. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and four 5/16" NC threaded nuts to attach side frames.
Bottom Tank
This tank has 2 1/4" diameter hose connection, a 1" diameter bypass hose, a 1/4" NPT flange for a drain fitting on the grill side, and four 5/16" NC threaded nuts to attach side frames.
Learn More -
Case solder-on bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, a pair of 3/8" NC threaded studs @ 17 3/8" centers (offset towards the grill side), and mounting blocks on each end with two 5/16" threaded holes.
Learn More -
Case solder-on tank
This Case tank has a 1 5/8" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Case Tank Set
Top Tank
This tank has a 1 3/4" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange for a sensor, and four 5/16" NC threaded hex nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and four 5/16" NC threaded hex nuts to attach the side frames.
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.