Search results for 'FREIGHTLINER'
-
Freightliner/Bus cross-flow solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 5" from the edge of the tank to the center of the hose connection, a 1/4" NPT coupling on each end of the tank, and two mounting bosses on each end.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 8 7/8" from the edge of the tank to the center of the hose connection, and two mounting bosses on each end.
Learn More -
Freightliner surge tank
This tank has three 5/16" NC threaded mounting nuts on each end, a 1" diameter hose connection, two 1/4" NPT couplings, a through hole from top to bottom, a trough to accommodate the overflow tube, a 3/8" diameter expansion tube, and a hole for a fill neck.
Learn More -
Fire Truck tank set
Inlet Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange on each end of the tank.
Outlet Tank
This tank has a 3" diameter hose connection, and a 1/4" NPT flange on each end of the tank.
A 1/4" NPT x 3/8" diameter 90o hose barb is provided.
Note: these crossflow tanks share the same header as the Freightliner 454 / 456 / 458 etc., but with different hose connections.
Learn More -
Bolt-on bottom tank
This tank is the same as a Freightliner #454 except the bolt on flange is 8" off center instead of in the center. The bolt pattern is also the same.
Learn More -
Freightliner Solder-On tank set
These tanks have a 3" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection (opposite ends for top or bottom tanks), and a 1/4" NPT flange for either a drain cock or an expansion fitting.
Note: this kit comes supplied with a 1/4" NPT x 3/8" hose barb, a 1/4" NPT drain cock, and eight 5/16" NC x 4 1/2" bolts with nuts.
Learn More -
Mercedes / Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, a mounting bolt on each end, a 1/4" NPT flange on the top of the tank to accommodate a 90o hose barb, eight threaded mounting blocks (4 on a side), and two 5/16" nuts in the top.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 7 1/2" from the edge of the tank to the center of the hose connection, a mounting boss on each end, eight threaded mounting blocks (4 on a side), and a 1/4" NPT flange for a drain (replaces OE spigot on orig. tank).
Note: tank set is similar to 2006CK, top tank is the same, and the bottom tank is a mirror image but without oil cooler holes.
Learn More -
-
Freightliner Solder-On kit
These tanks are identical. They have a 2" diameter hose connection 6" from the end of the tank to center of the hose connection, and two 1/4" NPT flanges for a drain/expansion fitting. Individual tank #4115.
This tank has Blue Bird applications.
Learn More -
Freightliner solder-on tank kit
These tanks have 2 1/2" hose connections, and four mounting bosses with rubber inserts. Individual tanks #4225 (aka 3054) and 4308.
Steel version #2003CK.
Learn More -
Freightliner solder-on tank kit
These tanks are identical. They have 2" diameter hose connections, two mounting bosses, and a steel bracket along the back.
Individual tank #4303. (front and back view shown here)
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.