Search results for 'mack'
-
Mack side frame
Top and bottom flanges each have 10 holes, 6 drilledclearance for 5/16" bolts and four tapped 5/16" NCTop flange also has a bracket extending the width to9", with two holes drilled clearance for 5/16" bolts.Frame has three angle brackets, two with 3/4"diameter holes and one with 3/8" diameter hole.Various other holes for shroud, brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack bottom tank
This tank is a mirror image of tank #665, so the rectangular flange is onpassengers side. Learn More -
Mack bottom tank
Tank has a 5" wide x 1" deep cut-out in centre ofheader for power take off, creating two 6 1/8" x12 1/4" header flanges with 22 bolt holes each.Flanges & mounts are the same as #664. Learn More -
Mack bottom tank
This tank has a bolt-on type flange with four 7/16" NC threadedholes, and two 5/8" NC mounting holes @ 9" centers.
Note: same as tank #663 but shorter. Learn More -
Mack bottom tank
This tank has a 1" diameter and a 1 1/4" diameter hose connection, two keyhole brackets that sit low on the tank @ 15 3/4" centers, and two 1/4" NPT flanges. A baffle in the center of the tank splits the radiator front to back. Learn More -
Mack bottom tank
This low flow tank has a baffle splitting the tank front toback, One 1" and one 1 1/4" diameter hose connectioncoming out the bottom on a 90o elbow andfacing passenger side on approximately a 45oangle. Two 1/4" NPT flanges for drains, and twokeyhole type mounting brackets 3" high @ 16"centers of round to round. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection straight out the bottom. The tank slopes from end to hose connection. Learn More -
These small brackets have a 3-bolt pattern for mounting a Charged Air Cooler to the front of the radiator.
Note: matches with tank #6626.
Learn More -
Mack solder-on complete set
Brass Kit N/A;CUC # N/A;Steel Kit #2660CT ;Model N/A;Header Size: 22 5/16" x 3 5/16"; rails are 35 13/16" long Learn More -
Mack solder-on complete set
Brass Kit N/A;CUC # N/A;Steel Kit #2660C ;Model N/A;Header Size: 22 5/16" x 3 5/16", rails are 30 7/16" long Learn More
Recently Viewed Products
My Quote
You have no items in your quote.