Search results for '708'
-
Kenworth / Peterbilt solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.
This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.
Learn More -
Peterbilt Bolt on Complete Core 36 1/4" x 34.62" x 2.62", 4 rows, RT type, top hose connection 2 1/2", btm 3" dia. Taalman tank #7081 top, #7191 Btm, #7241R & L rails, #7191 Brkt Parts can be sold separately Early model 387, 1999 Peterbilt 377 Learn More -
core dim: 36 1/4" x 34 1/2" x 2 7/8", louvered 4 row of 1/2" tubes, hose conn. 3"Radiator consists of Taalman's part #708, 719, 724 L&R and 7191 Learn More -
Peterbilt Bolt on complete core dim: 36 1/4" x 34 1/2" x 2 7/8", louvered 4 row of 1/2" tubes, hose conn. 3"Radiator consists of Taalman's part #708, 719, 7241 L&R and 7191 Taalman parts can be sold separately Learn More -
Kenworth / Peterbilt solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.
This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.
Note: this tank set matches brass kit #9505.
NOTE: top tank hose connection is 3" from center of hose connection to btm of tank, if yours is 2" please refer to part #2717T, tanks are identical except for height of hc Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and a threaded block on each end for mounting the side frames.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1 1/2" diameter through pipe, and a threaded block at each end for mounting the side frames.
Learn More -
Kubota solder-on tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, two mounting pins, four 5/16" threaded nuts, and a 1" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, two mounting pins, two threaded pins, and a 1/4" NPT flange for a drain fitting.
Learn More -
Hino tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a 90ohose barb, an 18mm flange for a sensor, a bracket on either end forattaching the side frames, and a hole in the top center for a hoseconnection.
Bottom Tank
This tank has a 2 1/4"diameter hose connection, a 1/4" NPT flange for a drain on the grillside, two mounting blocks, and a bracket on either end for mounting theside frames. Learn More -
Orion 7 Hybrid Bus CAC side frame
This frame has eight 3/8" NC threaded holes along each edge, and a bracket on the back for mounting. Learn More -
Orion 7 Hybrid Bus air deflectors and washer bars
H - Air Deflector - 8 bolt holes - 1 bolt hole in opposite angle - 14 1/8" long - 1 pc.
I - Air Deflector - 2 bolt holes - 1 bolt hole in opposite angle - 2 1/2" long - 1 pc.
J - Air Deflector - 12 bolt holes - 4 bolt holes in opposite angle - 2 notches in same angle for hose connections - interchangeable - 3 pcs.
K - Washer Bar - 20 1/4" long - 1" wide - 1/4" thick - 12 bolt holes - 4 pcs.
L - Threaded Bar - 5 5/8" long - 1" wide - 1/2" thick - 3 holes threaded @ 5/16" NC - 4 pcs. Learn More