Search results for '608'
-
KW Bolt on Complete Core 40" x 28.62 x 2 1/4", 4 rows , VT style top tank hose conn. 3 dia. Taalman #5993 top tank, #608-1 Btm tank, 619R&L rails Parts can be sold separately Learn More
-
Solder-on Top Tank
This tank has a 2 1/4" hose connection, a 3/8" NPT flange, and a 1 3/8" diameter hole in the top center for a fill neck.
Learn More -
New Flyer Bus Oil Cooler Tank
This tank has a pair of 2 1/2" diameter hose connections; one on either side of the deflection baffle, a 1/4" NPT flange on the bottom of the tank, a 1/4" NPT flange on the side of the tank, and four mounting brackets.
Note: this tank shares the bolt pattern with tank #082306C.
Learn More -
New Flyer Bus Oil Cooler Tank
This tank has a pair of 2 1/2" diameter hose connections; one on either side of the deflection baffle, a 1/2" NPT flange on the side of the tank, and four mounting brackets.
Note: this tank shares the bolt pattern with tank #082306C.
Learn More -
New Flyer Bus oil cooler tank
This tank has a pair of 2 1/2" diameter hose connections; one on either side of the deflection baffle, a 1/2" NPT flange for a drain cock, and three mounting brackets.
Note: this tank shares the bolt pattern with tank #082306B.
Learn More -
Bolt-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange to accommodate a hose barb, and a 1/4" NPT flange for a drain.
Side Frames
These frames are 26" tall, and each flange has eight bolt holes.
Note: this complete tank set is supplied with four washer bars 19 3/8" long with 10 bolt holes.
Sample Required Learn More -
Hitachi solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a bracket on each end for attaching the side frames, and a 1 1/8" diameter hole in the top center for a filler neck.
Botom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain cock, and at each end there is a threaded pin mount with 5/16" NC holes. Learn More -
Lift Truck solder-on tank set
Outlet Tank
This tank has a 1 3/8" diameter hose connection, eight 5/16" NC threaded nuts for mounting, a mounting bracket on the back, and two clips.
Inlet Tank
This tank has a 1 3/8" diameter hose connection, six 5/16" threaded holes for mounting, a hole for a filler neck, two clips, a mounting bracket on the back, and two holes @ 10 3/4" centers to accommodate an oil cooler.
Header size is the same as tank set #102908A.
Learn More -
Hay Grinder bolt-on complete set
Top Tank
This tank has a 1" diameter hose connection, a 1 1/2" diameter hose connection, two baffles 13" from each end, a 1/4" NPT flange, and a 1 1/8" diameter hole for a fill neck.
Bottom Tank
This is a blank tank with a baffle in the center, and two 1/4" NPT flanges for drain fittings.
Side Frames
50" long.
Comes with four washer bars - 1/4" x 1" x 38 1/2" - 19 BH
Learn More -
Hitachi solder-on tank set
These tanks have 2" diameter hose connections. The top tank has a bracket on each end to attach side frames, and the bottom tank has two threaded pin-mounts with 5/16" NC threaded holes and a 1/4" NPT flange for a drain.
Learn More