Search results for '509'
-
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, a flange on the side of the rectangular flange housing withtwo 5/16" NC holes, and two bottom mounting holes @ 25 1/4" centers. Two corners on the header arerounded off. Learn More -
Western Star bottom tank
This tank has two bolt-on type flanges for hose connections eachwith four 3/8" NC threaded holes, and two 5/8" NFthreaded studs at 8" centers. A bafflesplits the tank from left to right.
Note: this tank is the same as tank #509, except for the baffle.
Learn More -
Goes with #5093/5094 tanks and #5282L&R rails Learn More
-
Western Star top tank
This tank has a 2 1/2" diameter hose connection on the passenger side(slightly upward), and a 1/4" NPT flange. Learn More -
Porsche solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange, a 22mm fitting for a sensor, and two holes @ 11 1/4" centers for an oil cooler.
Frames
These frames had two 5/16" threaded holes in each.
Learn More -
John Deere tank set
Top Tank
This tank has a 1 1/2" diameter hose connection that comes out on an angle, four 5/16" NC threaded nuts to attach side frames, a 1 3/8" diameter hole for a filler neck, a 1 3/8" diameter stand pipe for a filler neck (original tank had a screw-cap filler), three 1/4" NPT flanges for a sensor and expansion fittings, and a small surge tank built into the top.
Bottom Tank
This tank has two holes @ 9 1/2" centers for an oil cooler, a 5/8" bypass hose, a 1 3/4" diameter hose connection, a mounting bar running along the center of the tank, and four 5/16" threaded nuts to attach side frames.
Learn More -
Woodchipper solder-on tank set
Top Tank
This tank has two 2 1/2" diameter hose connections 4" long, a 3/4" NPT fitting, and a baffle splits the tank in half between the hose connections.
Bottom Tank
This tank is a blank tank with no hose connections, fittings, or baffle.
Learn More -
Western Star cross bars
These cross bars are 44" long with 3/8" NC threads on each end.
Goes with #509 and #5091 tank set.
Learn More -
Bus solder-on top tank
This Bus top tank has a 1/4" NPT flange, and four 5/16" NC threaded studs facing the engine.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 10" long 2 1/2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a threaded bar on the grill side.
Bottom Tank
This tank has a 10" long 3" diameter hose connection, a 1/2" NPT flange for a drain fitting, and four 1/2" NC threaded mounting nuts.
Side Frames
One frame has six 3/8" slotted holes along each end for mounting, and the other frame has an angle with six 3/8" slotted holes for mounting.
Learn More