Search results for '30"'
-
Bolt-on top tank
This tank has a 2" diameter hose connection, a 1 1/4" NPT coupling for a sight glass, a 1 1/4" diameter hole for a filler neck, a 3/8" NPT flange for a sensor, and two lifting "ears".
Learn More -
Pearce Fire Truck complete tank set
Top Tank
This tank has a pair of 2 3/8" diameter hose connections, a mounting bracket at the front center of the tank, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a pair of 1/2" NC bolts 3" long @ 30" centers for mounting, a 3" diameter hose connection, a 1 3/4" diameter hose connection, and a 3/8" NPT plug for draining.
Side Frames
These frames have five 3/8" NC threaded holes on the back for mounting the frames, and ten 5/16" threaded holes along the sides for mounting the shroud.
Note: this set comes supplied with two 3/8" threaded tie rods 50" in length, and four washer bars that fit between the side frames.
Learn More -
Gen Set complete set
Top Tank
This tank has a 2" diameter stand pipe, and a 2" diameter hose connection.
Bottom Tank
This tank has a 2" diameter hose connection that comes out the bottom and angles 90o towards the engine.
Side Frames
Frames are 30" long, with an angle bracket centered along one edge with four slotted holes. Learn More -
Stationary Unit solder-on complete set
Top Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 1/2" diameter stand pipe for a fill neck.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two 3/8" NC threaded holes @ 14" centers for mounting.
Frames
These frames are 30" high, with three 5/16" NC threaded holes along the back for mounting.
Shroud
Three slotted holes along each side for attaching frames, four 5/16" NC threaded holes to attach finger guard, and a 22 1/8" diameter hole in the center.
Learn More -
GMC Brigadier top tank
This tank has a 3" diameter hose connection, a 1 " bypass hose, a pair of 1/2" NPT flanges for sight glasses ect., a 1/4" NPT flange for a sensor, a deairation fitting same as Ford style, and a 1 3/8" diameter hole for a fill neck.
sample/dwgs need to be provided
Learn More -
Gen Set complete solder-on set
Tanks (both are identical)
Thesetanks have a 2" diameter hose connection, two 1/4" NPT flanges, twothreaded bars with two 1/2" NC holes on each end to mount the sideframes, and the top tank has a hole in the top center for a filler neck.
Side Frames
Eachof these frames has eight 3/4" diameter holes to mount to the tanks,and two 1/2" thick feet on the bottom with two 3/4" diameter holes formounting to the floor.
This tank set includes four long and four short washer bars.
SAMPLE REQUIRED
Learn More -
Ford solder-on tank kit
These tanks have 1 3/4" diameter hose connections, and the bottom tank also has a 1" diameter connection as well as oil cooler holes spaced @ 12" center to center. There are mounting pegs on each end. Individual tanks #4205 (top) and #4206 (btm).
Learn More -
Bus cross flow tank
This tank has a 2" hose connection, and there is a 1/4" NPT flange.
Note: this tank pairs with tank #7417. Learn More -
Bus cross flow tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange, and a shutter flange.
Note: pairs with tank #7418. Learn More -
Bus Side Frame
Each end has five holes - 3 tapped 5/16" NC threadsand 2 drilled clearance for 5/16" bolts. There are six 5/16" NCthreaded nuts - three on each side of the rail.
Note: frames are interchangeable. Learn More