Search results for 'case'
-
Case solder-on tank set
These tanks have 2" diameter hose connections, and a mounting block on each end with two 5/16" NC threaded holes. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More
-
Case solder-on tank kit
These tanks have 2" diameter hose connections, and steel mounting brackets on each end. The top hank has a filler neck, and the bottom tank has a 1/4" NPT flange for a drain.
individual tanks #4268 and #4269.
Learn More
-
Case solder-on tank kit
The top tank has a 1 3/4" hose connection and a filler neck, and the bottom tank has a 2" diameter hose connection and a 1/4" NPT flange for a drain. There is a mounting boss at each end with a rubber insert.
Individual tanks #4301 and #4302.
Learn More
-
Case solder-on tank kit
These tanks are a mirror image of each other. They have 1 3/4" diameter hose connections, and a mounting boss with a rubber insert on each end.
Individual tanks #4288 and #4289.
Learn More
-
John Deere solder-on tank kit
The top tank has a 2 1/4" diameter hose connection, a filler neck, and a 1/4" NPT flange for an expansion fitting. The bottom tank has a 2 1/2" diameter hose connection, a 3/4" connection, and a 1/4" NPT flange for a drain. Each tank has a mounting boss with a rubber insert at each end.
Individual tanks #4262 and #4263.
Learn More
-
John Deere solder-on kit
These tanks have 2 1/4" diameter hose connections, and one tank has a steel bracket on the back.
Individual tanks #3070 and #3071.
Learn More
-
John Deere kit
These tanks have 2 1/2" diameter hose connections with a 1/4" flange for a drain cock on the bottom tank's connection. There is a steel bracket on the tanks with a clamp reinforcing the hose connections.
Individual tanks #4147 and #4148.
Learn More
-
John Deere solder-on tank kit
These tanks have 1 1/2" diameter hose connections. The inlet tank has a 1/4" NPT flange for a drain, and the outlet tank has a filler neck.
Individual tanks #4174 and #4175.
Learn More
-
Case Solder-on Kit
Top Tank
This tank has a 2" diameter hose connection, two mounting bosses with rubber inserts, and a filler neck on the top driver side.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4260 and # 4261.
Learn More
-
Case Solder-on Kit
Top Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a fill neck attached on top of the hose connection.
Bottom tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4256 and #4257.
Learn More
