Search results for 'case'
-
Case Tractor solder-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and two 1/4" NPT flanges.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 3/8" NPT flange on the bottom for a second drain fitting.
Side Frames
These frames have four 3/8" NC threaded holes along each edge.
Learn More -
Case Tractor solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1 3/8" diameter hole for a filler neck, a 1/4" NPT flange, a 1/8" NPT flange, and a bracket with two 1/4" NC threaded nuts.
Learn More -
Case solder-on tank
This tank has a 1 1/2" diameter hose connection 6" from the edge of the tank to the center of the hose connection.
Learn More -
Case Loader solder-on top tank
This tank has a 2 1/4" hose connection 7 1/4" from the edge of the tank to the center of the hose connection.
Learn More -
John Deere solder-on tank
This tank has a 1 1/2" diameter hose connection, and a stand pipe
for a filler neck.
Front and back view shown here.
Learn More -
Case tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a stand pipe for a filler neck, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" threaded nuts to attach the side frames.
Learn More -
Case Dozer tank set
Top Tank
This tank has a 2" diameter hose connection 9 1/4" from the edge of the tank to the center of the hose connection, a 1" diameter bypass connection 12 7/8" from the edge of the tank, a 1/4" NPT flange, and a hole on the top of the tank to accommodate a truck style filler neck 2" in from the edge of the tank to the center of the hole.
Bottom Tank
This tank has a 2" diameter hose connection 5" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain cock on the other side.
Learn More -
Case Loader solder-on tank set
These tanks have a 1 3/4" diameter hose connection, and the top tank has a 1 1/4" diameter hole for a filler neck.
Learn More -
Case solder-on set
These tanks have 1 3/4" diameter hose connections and a mounting bracket. The outlet tank has a 7/8" stand pipe for a filler neck.
Learn More -
Case solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange, and two 1/2" NC threaded mounting studs @ 14 3/4" centers.
Learn More