Search results for 'case'
-
Case Dozer bottom tankThis tank has a 2 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More
-
Case solder-on tank set
Top Tank
This tank has two 2 1/4" diameter hose connections, a deairation baffle, and a 1 3/4" diameter hole for a fill neck.
Bottom Tank
This tan has a 2 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 1418PC plate oil cooler.
Learn More
-
John Deere solder-on tank
This tank has a 2" diameter hose connection on the driver's side 2 3/8" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank 4 3/4" from the edge of the tank.
Front and back views shown here. Learn More
-
Case solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a stand pipe for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the hose connection for a drain fitting.
Learn More
-
Case side frame
This frame has seven 5/16" NC threaded holes along the edge of the frame, and nine 5/16" threaded holes along the opposite edge of the frame.
Learn More
-
Case side frame
This frame has five 5/16" NC threaded holes along the back of the frame, and an angle on the side of the frame with 5 clearance holes.
Learn More
-
Case bolt-on bottom tank
This tank has a 2 1/4" diameter hose connection, and a threaded block with a 1/2" NC threaded hole.
Learn More
-
This shroud has been modified as per customer instruction.
Learn More
-
Case solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange on the grill side for a drain fitting.
Learn More
-
Case Tractor solder-on tank set
Top Tank
This tank has a hole for a filler neck, a 1/8" NPT fitting, two 1/4" NC threaded holes on the fan side, a 2 1/4" diameter hose connection, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, a 18mm x 1.5mm threaded boss for a sensor, and a 1/4" NPT flange for a drain fitting.
Learn More