Search results for 'John Deere'
-
Case solder-on bottom tank - 1994
This tank has a 2 1/4" diameter hose connection 4 1/8" in from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain, and a bracket on each end to mount side frames.
Learn More -
John Deere solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 1/4" diameter hole on the top, and a 1 3/8" diameter hole on the top.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 5 1/4" from the edge to the center of the HC, and a hole on the top for a filler neck.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 4 1/2" from the edge to the center of the HC, and a 1/4" NPT flange.
Learn More -
John Deere solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a hole for a filler neck, and a 1/2" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Note: this set is to replace an original side by side rad and oil cooler - original tanks measured 14" x 3".
Learn More -
Case Dozer bottom tank
This tank has a 2 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
Case solder-on tank set
Top Tank
This tank has two 2 1/4" diameter hose connections, a deairation baffle, and a 1 3/4" diameter hole for a fill neck.
Bottom Tank
This tan has a 2 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 1418PC plate oil cooler.
Learn More -
John Deere solder-on tank
This tank has a 2" diameter hose connection on the driver's side 2 3/8" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank 4 3/4" from the edge of the tank.Front and back views shown here.
Learn More -
Case solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a stand pipe for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the hose connection for a drain fitting.
Learn More -
John Deere tank
This bottom tank has a 2 3/4" diameter hose connection 6 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom 9" from the edge of the tank, and 2 large mounting brackets at the back.
Front and back views shown here.
Learn More -
This shroud has been modified as per customer instruction.
Learn More