Search results for 'FREIGHTLINER'
-
Freightliner solder-on tank set
These tanks have 2" diameter hose connections, two mounting bosses, a 1/4" NPT flange for a drain/expansion fitting, and four 1/4" NC threaded nuts along the grill side. The bottom tank is deeper and has holes for an oil cooler @ 18" centers.
Note: this set is the mirror image of tank set #2014CK.
Learn More -
Bus/Freightliner solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a pair of pin mounts, a1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blockson the grill side of the tank.
Bottom Tank
This tank as oil cooler holes @ 18" centers, a 2" diameter hoseconnection, a 1/4" NPT flange for a drain, a pair of pin mounts, andfour 1/4" NC threaded nuts along the grill side of the tank.
Note: same as tanks #2014CK but 2" longer.
Learn More -
Freightliner Sterling tank set (matches brass kit #9415)
Top Tank
This tank has a 2" diameter hose connection, six 5/16" NC threaded blocks (two on the fan side and four on the grill side), four mounting bosses to attach the side frames, an a 1/4" NPT coupling for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, six 5/16" NC threaded blocks (two on the fan side and four on the grill side), four mounting bosses to attach the side frames, a 1/4" NPT coupling for a drain cock, and oil cooler holes.
Note: this tank kit comes supplied with all necessary bolts, nuts, washers, and fittings.
Learn More -
Sterling / Freightliner solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, six 1/4" NC threaded nuts (two on the fan side, and four on the grill side), two mounting bracket on each end to attach side frames, and an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, six 1/4" NC threaded nuts (two on the fan side and four on the grill side), two mounting brackets on each end to attach side frames, a 1/4" NPT flange for a drain cock, and holes @ 18" centers for an oil cooler.
Comes with eight 5/16" x 5" NC bolts with nuts and washers.
Learn More -
Freightliner Coronado solder-on tank set
These tanks have 2 1/2" diameter hose connections, a 1/4" NPT flange for a drain/expansion fitting, a mounting boss at each end to attach side frames, and four 5/16" threaded nuts to attach the fan shroud and rubber air deflectors. The top tank has two 3/8" NC threaded nuts for mounting the surge tank, and the bottom tank has holes @ 12" centers to accommodate an oil cooler.
Note: this set is for a 2008 Coronado with a Detroit Diesel engine.
Learn More -
Learn MoreFreightliner / Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/4" NPT flange on the top of the tank (for a 90o hose barb), eight 5/16" NPT threaded blocks, and two 5/16" NC nuts in the top of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/2" NPT flange (for a drain cock), eight 1/4" NPT threaded blocks, and two holes @ 12" centers to accommodate an oil cooler (to be supplied by the customer). Hose conn. 7 1/2" from end to center
Note: this tank set is used with a Mercedes engine. (matches brass kit #9414)
(Same set with O/C holes is #2007CK-O/C.)
-
Freightliner Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, a sleeve for a mounting bolt on each end of the tank, four 5/16" NC threaded blocks on each side, a 1/4" NPT flange for a 90o hose barb, and a pair of 5/16" nuts on the top.
Bottom Tank
This tank is similar to the top tank, except the 2 1/2" diameter hose connection is 7 1/2" from the edge of the tank to the center of the hose connection, and there are holes @ 12" centers to accommodate an oil cooler.
Matches brass kit #9413.
Used with a Detroit Diesel engine.
Used to be called #2006CK - that number is now without oil cooler holes.
Learn More -
Freightliner Solder-On tank set
Top Tank
This tank has a 2" diameter hose connection, a 3/8" diameter expansion tube coming out of the top of the hose connection, two pin mounts for attaching side frames, and four mounting nuts on the grill side of the tank.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT fitting for a drain cock, holes @ 18" centers for an oil cooler, two pin mounts for attaching side frames, and four mounting nuts on the grill side of the tank.
Comes with four 5/16" NC x 4 1/2" bolts with nuts, and a 1/4" NPT drain.
Note: this tank set fits with Mercedes engine.
Learn More -
Freightliner solder-on tank set
These tanks are identical. They have 2 1/2" diameter hose connections, and a 1/4" NPT flange for a drain/expansion fitting.
Brass version #9412.
Learn More -
Blue Bird / Thomas Bus / Freightliner
solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a mounting boss at each end to attach side frames, a 1/4" NPT flange for an expansion fitting, and three brackets on the grill side.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain, and two holes for a 7 plate oil cooler with fittings spaced @ 18" (718PC).
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.