Search results for '10" oil cooler'
-
International solder-on set
Top Tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain cock, and holes @ 18" centers to accommodate on oil cooler.
Learn More -
Motor Home tank set (Freightliner)
Inlet Tank
This tank has a 2" diameter hose connection 6 1/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange at each end of the tank for drainage.
Outlet Tank
This tank has a 2" hose connection 7 3/4" from the edge of the tank to the center of the hose connection, a hole on one end for the fill neck, and holes @ 18" centers to accommodate an oil cooler.
Learn More -
Freightliner Solder-On set
The top & bottom hose connections are 2 1/2"in diameter, the top one is 5 1/2" from the end of the tank to the center, and the bottom tank has the connection 9 1/2" from the end to the center. The top tank has single pins on each end, and the bottom has double pins, and holes for an oil cooler. Learn More -
Volvo / GM / Mack solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the top, four 1/4" NC threaded blocks on the grill side, and a 1/4" NPT flange for an expansion barb.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the grill side, a 22mm flange for a quick fill line, and two holes @ 11 1/2" centers to accommodate an oil cooler.
Learn More -
Volvo / GM solder-on tank set
Top Tank
This tank has a 2 1/2" Hose connection (angled upward), a 1/4" NPT flange for an expansion tube, two 5/16" mounting holes to attach side frames, three 5/16" NC threaded blocks to mount the surge tank, and four 1/4" threaded blocks to attach the rubber seal.
Bottom Tank
This tank is the same as the top except the hose connection is at the other end, the flange is for a drain cock, and there are holes @ 11 1/2" centers to accommodate an oil cooler (to be supplied and installed by the customer).
Note: this set can also be referenced as #082407A.
Learn More -
Volvo / GM solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange to accommodate a hose barb for venting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection slanting at an angle towards the ground, a 1/4" NPT extended flange for a drain cock, two holes @ 10" centers to accommodate an oil cooler, and four mounting bosses to accommodate 5/16" bolts.
Kit comes with a 1/4" NPT drain cock, a 1/4" NPT 90o elbow, and a 1/4" NPT x 3/8" hose barb.
Note: this kit matches brass kit #9303.
Learn More -
Freightliner solder-on tank set
These tanks have 2" diameter hose connections, two mounting bosses, a 1/4" NPT flange for a drain/expansion fitting, and four 1/4" NC threaded nuts along the grill side. The bottom tank is deeper and has holes for an oil cooler @ 18" centers.
Note: this set is the mirror image of tank set #2014CK.
Learn More -
Bus solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a pair of pin mounts, a1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blockson the grill side of the tank.
Bottom Tank
This tank as oil cooler holes @ 18" centers, a 2" diameter hoseconnection, a 1/4" NPT flange for a drain, a pair of pin mounts, andfour 1/4" NC threaded nuts along the grill side of the tank.
Note: also has Ford Sterling applications.
Learn More -
Bus/Freightliner solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a pair of pin mounts, a1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blockson the grill side of the tank.
Bottom Tank
This tank as oil cooler holes @ 18" centers, a 2" diameter hoseconnection, a 1/4" NPT flange for a drain, a pair of pin mounts, andfour 1/4" NC threaded nuts along the grill side of the tank.
Note: same as tanks #2014CK but 2" longer.
Learn More -
Freightliner Sterling tank set (matches brass kit #9415)
Top Tank
This tank has a 2" diameter hose connection, six 5/16" NC threaded blocks (two on the fan side and four on the grill side), four mounting bosses to attach the side frames, an a 1/4" NPT coupling for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, six 5/16" NC threaded blocks (two on the fan side and four on the grill side), four mounting bosses to attach the side frames, a 1/4" NPT coupling for a drain cock, and oil cooler holes.
Note: this tank kit comes supplied with all necessary bolts, nuts, washers, and fittings.
Learn More
You have no items in your quote.