Search results for 'the'
-
AutoCar top tank
This tank has a built-in baffle with twenty-three 5/16" NC threaded holes forthe header, a flange in the baffle on the passenger side withfour 5/16" threaded holes, two bolt-on type flangeswith four 3/8" NC threaded holes in each, a bolt-on type flange on the passenger side with two 3/8" NCthreaded holes, two 1/8" one 3/8" and one 1/2"NPT flange facing the engine, and a 1/2" NPT flange on the grill side just below the cut-out for the filler neck. Learn More -
AutoCar top tank
This tank has two bolt-on type flanges with four 3/8" NCthreaded holes in each, a bolt-on type flange onthe passenger's side with two 3/8" NPT flanges facing theengine, a bolt-on type flange on the top with two 3/8"NC threaded holes, a 1 1/4" hole on the top for a fillerneck, a 1/2" NPT flange facing the grill side, and abolt-on type flange with four 5/16" NC threadedholes in the baffle on the passenger's side. Learn More -
NPT to SAE adapter
This adapter facilitates connecting newer style SAE lines to the traditional style NPT oil coolers.
3/4" NPT to 3/4" SAE 12
Learn More -
Blank Solder-On Tanks
These blank tanks can be made to any header size or depth required - no samples needed.
Call or fax dimensions.
Learn More -
-
Toyota solder-on tank kit
These tanks have 1 3/8" diameter hose connections, the right side tank has a stand pipe for a filler neck and oil cooler holes spaced @ 10 3/4" center to center, and both tanks have steel mounting brackets that cover most of the tank. Individual tanks #4111X and #4112X.
Learn More -
Nissan solder-on tank kit
These tanks have 1 1/4" hose connections and steel mounting brackets, and the left side tank has a stand pipe for a filler neck and oil cooler holes spaced @ 7 3/4" center to center. Individual tanks #4218B and #4219B.
Learn More -
Toyota solder-on tank kit
These tanks have 1 1/2" diameterhose connections. The top tank has a hole for a filler neck,the bottom tank has holes for an oil cooler spaced @ 10 7/8", and thereare various brackets for mounting. Individual tanks #3099 (top) and #4100A (btm).
Learn More -
Mack Advance bottom tank
This tank has two mounting plates with a 5/8" NC threaded hole in the center, a 1" diameter hose connection that runs along the front of the tank, a 1 1/4" diameter hose connection, and two 1/4" NPT drain flanges. A baffle divides the tank across the width. Learn More -
Mack Advance top tank
This top tank has an angle bracket on the top of the tank with 6 holes, a 1" hose connection in the center of the tank, two 1/4" NPT fittings, a 1/2" NPT fitting on the back for a sight glass, a hole for filler neck on the top of the tank, a 1" NPT access for a check valve, and a 3/4" NPT fitting for a fill bypass. Learn More