Search results for '10" oil cooler'
-
International 1/2 core bottom tank 2 1/4" hose connection, 4" from end to center, oil cooler holes 18" centers Learn More -
International 1/2 core bottom tank 2 1/4" hose connection, 4" from end to center, oil cooler holes 18" centers Learn More -
International 1/2 core btm tank 2 1/2" hose conn. 6 1/2" from end of tank to center, oil cooler holes 18" centers Learn More -
Freightliner top tank
Low flow tank with "rounded" header has one 1" diameterhose connection on driver's side lower section facingpassenger side (on a 75o angle), a 1" diameterhose connection on passenger's side of center facingpassenger side and slightly down, a 3/8" diameter hoseconnection on passenger side facing engine, twobolt-on type flanges on top of tank, a 1/4" NPTflange in built-in baffle for check valve, and the top driver'sside of tank is cut lower to accommodate air to aircooler.
Note : tank comes with check valve installed. Learn More -
International solder-on bottom tank
HDR: 26 1/4 x 3, 2 1/2 hose conn., 6 1/2 " from end of tank to center of conn., 18" centers oil cooler holes Learn More -
International solder-on bottom tank
HDR: 26" x 3" x 4" deep, 2 1/2" hose conn., 6 1/2 from end of tank to center of conn., 18" centers oil cooler holes Learn More -
International solder-on bottom tank
#4133A International 1/2 core; HDR - 26 1/2" x 3" with oil cooler holes Learn More -
Freightliner complete w/ oil cooler, core dim: 34 3/8 x 23 7/8 x 1 7/8, 3 rows of 1/2" tubes, top hose conn. 2", btm conn. 2 1/4", 18" ctr oil cooler, hddr: 3 x 25 3/8, side rails not included
Taalman #2414CK-OC steel version
Tanks can be sold separately
Learn More -
International 1/2 Core Btm tank 2 1/2" hose conn., 18" centers oil cooler holes Learn More -
Western Star solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 5 1/2" from the edge of the tank to the center of the pipe, two 3/8" NC nuts on the top, four 5/16" threaded blocks on each side, a 1/4" NPT flange on top for a 90o hose barb fitting, and two bolt sleeves @40" centers.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 9" from the edge of the tank to the center of the pipe, four 5/16" threaded blocks on each side, two bolt sleeves @40" centers, and a 1/4" NPT flange for a drain fitting.
#512PC oil cooler can be supplied.
Tank set it the same as #2008CK, except the bottom tank has the hose connection on the other end.
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.