Search results for 'kenworth'
-
Kenworth bottom tankThis tank has a flange on the bottom with four 7/16" NCthreaded holes, and a flange on the side with two 5/16"NC threaded holes @ 2 3/8" centers.
Note: similar to tank #601 but wider. Learn More
-
Kenworth top tank.Top section favors passenger's side and overhangstowards the engine. One 3/4" NPT flange underthe overhang on the passenger's side, a 1" NPT flangeon the lower section of the tank facing up on the driver's side, three 1/4" NPT flanges, a bracket on the top, and a flange with 6 holes threaded #10-32 on top slope oftank for access to check valve. One hole for fillerneck.
Learn More
-
Kenworth top tankSame as tank #599LF, except with a 1" diameter hoseconnection between the 4th & 5th bolt holes frompassenger side (facing engine).
Learn More
-
Kenworth top tankThis low flow tank comes complete with check valve.One 3/4" NPT flange straight down on passenger'sside, a 1" NPT flange on the lower part of the tankfacing up on passenger's side, three 1/4" NPTflanges, a bracket on top, a 1 3/4" hole on topfor filler neck, and a flange with 6 holes tapped 10-32on top towards the front for access to check valve.
Learn More
-
Kenworth top tankThis low flow top tank comes complete with checkvalve. The top part of the tank is sloped on the front and onthe driver side. There is a 1" NPT flange on the lower sectionof driver side, a 1" diameter hose connection facingdown on the passenger side, three 1/4" NPT flangesfacing the engine, a bracket on the top, a flange on the topwith six holes threaded 10-32 to access the check valve,and a hole on the front driver side of center for a filler neck.
Learn More
-
Peterbilt / Kenworth solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 11 1/2" from the end of the tank to the center of the hose connection, four mounting bosses to attach side frames, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 11 1/2" from the end of the tank to the center of the hose connection, and four mounting bosses to attach the side frames.
New 2011 Kenworth 440
Learn More
-
Peterbilt solder-on tank set
These tanks have a 2 1/2" diameter hose connection, four mounting bosses to attach side frames, and a 1/4" NPT flange for a drain/expansion fitting.
Virtually identical to #110409A, but with a different height of the upper hose connection. Learn More
-
Peterbilt solder-on tank set
These tanks are identical to each other. They have a 2 1/2" diameter hose connection on a 90
o angle, four mounting bosses to attach the side frames, and a 1/4" NPT flange for a drain/expansion fitting.
Learn More
-
Peterbilt / Kenworth solder-on tank setBoth of these tanks are identical. Each has a 2 1/2" diameter hose connection 13 7/8" from the edge of the tank to the center of the hose connection, two mounting bosses on each end to attach side frames, and a 1/4" NPT flange to accommodate a drain cock or expansion fitting.
This tank set is supplied with eight 5/16" x 4 1/2" bolts with nuts, a 1/4" NPT drain cock, and a 1/4" NPT 90o hose barb.
Learn More
-
Kenworth solder-on tank setThese tanks are identical. They have 2 1/2" diameter hose connections that angle towards the core, and a 1/4" NPT coupling for a drain/expansion fitting. Individual tank #4114.
Brass version #9502.
Learn More
