Search results for '44 BH'
-
Hdr: 50 x 13, 2 bolt on flanges, each 3" dia., 1 - 1/4" NPT fitting in center
Learn More -
Bottom tank hdr: 50 x 9, 1 mtg flange, 2 brkts Learn More -
Mack Advance bottom tank
This tank has two mounting plates with a 5/8" NC threaded hole in the center, a 1" diameter hose connection that runs along the front of the tank, a 1 1/4" diameter hose connection, and two 1/4" NPT drain flanges. A baffle divides the tank across the width. Learn More -
Mack Advance top tank
This top tank has an angle bracket on the top of the tank with 6 holes, a 1" hose connection in the center of the tank, two 1/4" NPT fittings, a 1/2" NPT fitting on the back for a sight glass, a hole for filler neck on the top of the tank, a 1" NPT access for a check valve, and a 3/4" NPT fitting for a fill bypass. Learn More -
GMC bottom tank
This tank has a baffle that runs along the length of the tank down the middle, a 1" and a 1 1/4" diameter hose connection, and a 1/4" NPT flange near the 1" hose connection.
Note: the 1 1/4" diameter hose connection runs to the far side of the baffle.
Learn More -
GMC bottom tank
This tank has a 1 1/4" diameter hose connection on the passenger side coming straight out, a 1" diameter hose connection on driver side on a 90o angle facing towards the center of the tank, two 1/4' NPT flanges, a baffle in the center of the tank, and two mounting nuts with 1/2" NC threads @ 8" centers. Learn More -
GMC bottom tank
This one-pass low flow tank has a 1 1/4" diameter hose connection coming straight out from passenger side facing the engine, a 1/4" NPT fitting next to the pipe, and a mounting bracket with two 1/2" NC threaded nuts @ 8" centers. Learn More -
GMC top tank
This low flow top tank comes complete with checkvalve. There are twenty five 5/16" NC threaded holes in the built inbaffle, a 1" diameter hose connection straight downfrom the baffle on passenger side, two 1/2" NPT andone 1/8" NPT flange facing the engine, a bolt-on typeflange on top of the tank to access the check valve. The top frontcorners of the tank are cut lower and there are two rounded cut-outs across topof tank, and a 1 1/4" diameter hole for filler neck ontop passenger side corner. Learn More -
Bus Top Frame
This frame has eight 3/8" NC threaded holes along each edge of the frame.
Note: matches tank #7433, #753, and #754.
Learn More -
Bus Btm Frame
This Bus frame has a length of 32 1/4", with eight 3/8" NC threaded holes along the edge of the frame, and four 1/2" NC threaded holes along the back of the frame.
Note: the header bolt pattern matches #7433, #753, #754 tanks.
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.