Search results for '32 BH'
-
Kenworth side frame
Top and bottom flanges have 12 bolt holes each. There is a "Z" bracket, two "ear" brackets and 2 keyhole brackets for mounting a charge air cooler.
NOTE: Frames are not interchangeable. Order left or right accordingly. (right frame shown here)
Learn More -
AutoCar bottom tank
This tank has two bolt-on type flanges with four 3/8" NC threadedholes in each, and two mounting studs with 5/8" NCthreads @ 8" centers. Learn More -
AutoCar top tank
This tank has a built-in baffle with twenty-three 5/16" NC threaded holes forthe header, a flange in the baffle on the passenger side withfour 5/16" threaded holes, two bolt-on type flangeswith four 3/8" NC threaded holes in each, a bolt-on type flange on the passenger side with two 3/8" NCthreaded holes, two 1/8" one 3/8" and one 1/2"NPT flange facing the engine, and a 1/2" NPT flange on the grill side just below the cut-out for the filler neck. Learn More -
AutoCar top tank
This tank has two bolt-on type flanges with four 3/8" NCthreaded holes in each, a bolt-on type flange onthe passenger's side with two 3/8" NPT flanges facing theengine, a bolt-on type flange on the top with two 3/8"NC threaded holes, a 1 1/4" hole on the top for a fillerneck, a 1/2" NPT flange facing the grill side, and abolt-on type flange with four 5/16" NC threadedholes in the baffle on the passenger's side. Learn More -
-
Hdr: 50 x 13, 2 bolt on flanges, each 3" dia., 1 - 1/4" NPT fitting in center
Learn More -
Bottom tank hdr: 50 x 9, 1 mtg flange, 2 brkts Learn More -
Mack Advance bottom tank
This tank has two mounting plates with a 5/8" NC threaded hole in the center, a 1" diameter hose connection that runs along the front of the tank, a 1 1/4" diameter hose connection, and two 1/4" NPT drain flanges. A baffle divides the tank across the width. Learn More -
Mack Advance top tank
This top tank has an angle bracket on the top of the tank with 6 holes, a 1" hose connection in the center of the tank, two 1/4" NPT fittings, a 1/2" NPT fitting on the back for a sight glass, a hole for filler neck on the top of the tank, a 1" NPT access for a check valve, and a 3/4" NPT fitting for a fill bypass. Learn More -
GMC bottom tank
This tank has a baffle that runs along the length of the tank down the middle, a 1" and a 1 1/4" diameter hose connection, and a 1/4" NPT flange near the 1" hose connection.
Note: the 1 1/4" diameter hose connection runs to the far side of the baffle.
Learn More