Search results for 'radiator'
-
These small brackets have a 3-bolt pattern for mounting a Charged Air Cooler to the front of the radiator.
Note: matches with tank #6626.
Learn More -
Kenworth bottom tank
Optional low flow to tank #610LF. Tanks areidentical except the baffle on #612LF splits theradiator left to right ( #610LF baffle splits tank front toback). Learn More -
Western Star bottom tank
This tank is the same as tank #510-1, except with a baffle splittingthe radiator left to right. Learn More -
Nova Bus end tank
This tank has a 2 1/2" diameter hose connection that angles away from the radiator, and a 1/4" NPT flange.
Learn More -
Universal hose connection
This hose connection is 2 1/2" in diameter, and is shaped in an "S" curve. Can be used in applications in which a replacement radiator does not perfectly align to the existing rad hose.
Learn More -
Pump Radiator tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange on the top of the tank and one facing the engine.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, and a 1/4" NPT flange facing the engine.
Learn More -
Orion 7 Hybrid Bus CAC bracket
This charged air cooler brackethas dimensions of 26" x 8". It has various clearance holes for boltingto the main radiator assembly.
Note: this bracket is paired with bracket #091708E. Learn More -
Orion 7 Hybrid Bus CAC bracket
This charged air cooler brackethas dimensions of 26" x 8". It has six 3/8" NC threaded nuts on amounting bracket placed on the back, and various clearance holes forattaching to the radiator. Learn More -
Cat top tank
This tank has a bolt-up type flange with four 3/8" NC threaded holes, located in the center of the tank, to accommodate a 2 1/2" diameter hose connection. There are threaded bars welded along the header, each with four 3/8" threaded holes, a 1/4" NPT flange to accommodate a sensor, a raised filler neck hole in the top center of the tank, a large opening with a threaded stud in the center (typical Cat filler assembly), and a threaded bung on each end each with 5/8" NC threaded holes (for lifting the radiator).
Note: for this tank, a sample must be supplied by the customer.
Learn More -
MCI Bus CAC bracket
This charged air cooler bracket is 25 1/2" long by 7 3/8" wide with a height of 5 1/2" (not including mounting brackets). There are six clearance holes on each side of the bracket to bolt to the radiator, and two mounting brackets on the back.
Used with frames #753 and #754.
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.