Search results for '717'
-
Kenworth Solder on Complete Core dim: 38" x 32 1/16" x 1 7/8", 3 rows of 1/2" tubes, 2 1/2" hose connection Learn More
-
Peterbilt bracket
This mounting bracket has two 11/16" diameter holes for mounting bolts @ 18 3/4" centers, and a 4" diameter hole to allow clearance for the hose connection.
Note: matches with #7172 tank.
Learn More -
Peterbilt bottom tank
This tank has a 2 1/2" diameter hose connection 15 3/4" from the edge of the tank to the center of the hose connection that comes straight out the bottom of the tank.
Note: bolt pattern is the same as a #719.
-
Peterbilt tank
This tank has a 2 1/2" hose connection that comes out at the bottom of the tank then bends 90o, a 1/4" NPT flange for a drain cock, and a PTO cut-out in the center of the tank.
Note: bolt pattern is the same as a #514 or a #800
Learn More -
Mack side frame
Top & bottom flanges each have 7 holes, 4 tapped5/16" NC threads and 3 drilled clearance for 5/16"bolts. Two sleeves for cross bars welded to gussets.Total of 36 - 5/16" N.C. threaded holes on channel, 5on engine side, 9 on grille side and 22 on flat side ofchannel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Peterbilt bottom tank
Two bolt-on type flanges with two 7/16" NC threadsin each. One bolt-on type flange with two 5/16" NCthreads. Two mounting holes with 5/8" NC threadsat 16" centers. Tank dips in the middle to accommodate a PTO. Learn More