Search results for '609'
-
People Mover Bus bottom tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and two indents to allow for bolt heads. Learn More -
John Deere tank set
Top Tank
This tank has a 2" diameter hose connection, and 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain.
Learn More -
Lift Truck solder-on tank
This tank has a 1 1/2" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Kubota solder-on set
Top Tank
This tank has a 1 1/4" diameter hose connection, two mounting pins, two 1/4" threaded nuts on the fan side and two 1/4" threaded nuts on the grill side, and a hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, two mounting pins @ 15" centers, a 3/4" diameter bypass hose, and a 1/4" NPT coupling for a drain fitting.
Learn More -
New Holland L180 Skid Steer solder-on set
These tanks have 1 3/4" diameter hose connections, two 3/8" NC threaded nuts, and two "ears" on the end of the tank to mount an oil cooler. The top tank has a hole for a filler neck and a lifting lug, and the bottom tank has a 1/4" NPT flange for a drain fitting. Learn More -
Solder-on Side Frame
This side frame is 3 5/8" wide and 1" deep. There are five 5/16" NC threaded nuts along the back of the frame, and five 5/16" NC threaded nuts along the edge of the frame.
Learn More -
Bolt-on top tank with surge tank
This top tank has two 2 1/4" diameter hose connections, a 1/2" NPT flange for a sight glass, a 1/4" NPT flange for a sensor, and a hole in the top for a fill neck.
Learn More -
Case solder-on tank
This Case tank has a 1 5/8" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Case Tank Set
Top Tank
This tank has a 1 3/4" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange for a sensor, and four 5/16" NC threaded hex nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and four 5/16" NC threaded hex nuts to attach the side frames.
Learn More -
John Deere solder-on tank
This tank has a 1 1/2" diameter hose connection, and a stand pipe
for a filler neck.
Front and back view shown here.
Learn More