Search results for '602'
-
Kenworth top tank
This tank is the top of a #594LF, with the header of a #591 or #602 tank.
Learn More -
Kenworth bottom tank
This tank is the same as a #610LF, except stretched to the header size and bolt pattern of a #591 or #602 tank.
Learn More -
Bolt-on bottom tank
This tank has a 3 1/2" diameter hose connection, and two 5/8"NC threaded nuts spaced @ 16" centers.
The connection and nuts are offset from the center towards the fan side.
Bolt pattern the same as tanks #591 and #602.
Learn More -
Mack / Vision solder-on tank set
These tanks have 2" diameter hose connections, with the top tank's hose connection angling slightly upwards. The bottom tank has a 3/8" NPT flange facing the engine. Each tank has two mounting bosses at each end with rubber inserts (older model shown here with steel mounting brackets). Individual tanks #4159 (top) and #4160 (btm).
Steel kit #2655CK.
Learn More -
Kenworth bottom tank
This tank has a 3" diameter hose connection 18" from the edge of the tank to the center of the hose connection. It is the same as tank #6023, except the hose connection is permanently welded on instead of a bolt-on type.
Note: this tank shares the bolt pattern with tank #602.
Learn More -
Kenworth bottom tank
This basic shallow tank has one large bolt-up style flange with four 3/8" NC studs. The flange is located 18" from edge of the tank to center of the flange.
Note: the same tank can be ordered with a permanently welded-on hose connection - tank #6024.
Learn More -
Kenworth top tank
This tank is the same as tank #5911, except the hose connections are only 2 1/2" diameter instead of 3" diameter.
Note: this tank shares the bolt pattern with tank #591 and tank #602.
Learn More -
Kenworth top tank
This tank is the same as tank #591, except the surge tank is only 21" in length, centered on the top of the tank, to allow room for a charged air cooler.
Bolt pattern matches tank #591 and tank #602.
Learn More -
Kenworth side frame
This frame has 12 bolt holes per flange (two threaded 5/16" NC), and various brackets along the back of the frame for mounting a variety of attachments (CAC, condensers, etc...), and there are "ears" on the gussets for mounting an oil cooler.
Note: this frame matches with tank #5911 and tank #6024.
Learn More -
Kenworth bottom tank
This tank has a flange at the center of the tank with four bolts with 3/8" NC threads, and a flange on the side of the tank with two bolts with3/8" NC threads. Learn More