Search results for '44 BH'
-
AutoCar bottom tank
This tank has a 1 1/4" diameter hose connection on the passenger side straight out tothe engine, a baffle 13 1/16" in from the passenger side, two 1/4" NPT flanges, and two 5/8" NC threadedstuds 2 3/4" long @ 8" centers. Learn More -
AutoCar bottom tank
This tank has two flush mounting bolt-on flanges with four 1/2" NC bolt holes, and two mounting studs 2 3/4" longwith 5/8" NF threads at 8" centers.
Note: similar to tank #510-1, but wider, and with a different bolt hole pattern. Learn More -
MCI Bus top tank
This tank has a 2" diameter hose connection, and two 3/8" NPT flanges for expansion fittings.
Pairs with bottom tank #061510B, and washer bar #061510C. Learn More -
Volvo / Autocar top/bottom tank
This tank has a 2 1/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the pipe, a 1/4" NPT flange for an expansion fitting, and three 5/16" NC threaded nuts under the hose connection instead of bolt holes. Learn More -
Mack bottom tank
This tank has a 3" diameter hose connection, two keyhole brackets @ 15 3/4" centers, and a 3/8" NPT flange.
Learn More -
AutoCar top tank
This tank has a 2 1/4" diameter hose connection on the passenger side, and two 1/4" NPT threadedfittings. Learn More -
AutoCar top tank
This tank has a 2 1/2" hose connection 3" long coming straightout on the driver side (10 3/4" in from the end), and two 1/4"NPT threaded flanges. Learn More -
AutoCar bottom tank
This tank has two bolt-on type flanges with four 3/8" NC threadedholes in each, and two mounting studs with 5/8" NCthreads @ 8" centers. Learn More -
AutoCar top tank
This tank has a built-in baffle with twenty-three 5/16" NC threaded holes forthe header, a flange in the baffle on the passenger side withfour 5/16" threaded holes, two bolt-on type flangeswith four 3/8" NC threaded holes in each, a bolt-on type flange on the passenger side with two 3/8" NCthreaded holes, two 1/8" one 3/8" and one 1/2"NPT flange facing the engine, and a 1/2" NPT flange on the grill side just below the cut-out for the filler neck. Learn More -
AutoCar top tank
This tank has two bolt-on type flanges with four 3/8" NCthreaded holes in each, a bolt-on type flange onthe passenger's side with two 3/8" NPT flanges facing theengine, a bolt-on type flange on the top with two 3/8"NC threaded holes, a 1 1/4" hole on the top for a fillerneck, a 1/2" NPT flange facing the grill side, and abolt-on type flange with four 5/16" NC threadedholes in the baffle on the passenger's side. Learn More
Recently Viewed Products
My Quote
You have no items in your quote.