Search results for 'the'
-
Ford bottom tank
One 1" and one 1 1/4" hose connection. Two 1/4" NPT fittings. One baffle in the center of the tank. Learn More -
Ford bottom tank
This tank has a 3 1/2" diameter hose connection straight out thebottom and turns on approximately 45 degree angleupwards, and a 1/8" NPT flange for a drain cock. Learn More -
Ford cross flow tank
This low flow tank has a 1" diameter hose connection, and two 5/16" NC threaded holes in the tank. Learn More -
Mack side frame
Both flanges have 10 holes, 2 tapped 3/8" NC and 8drilled clearance for 3/8" bolts. Two angle brackets onside, with a 5/16" NC threaded hole in each. Variousother holes for shroud and brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top and bottom flanges each have 10 holes, 6 drilledclearance for 5/16" bolts and four tapped 5/16" NCTop flange also has a bracket extending the width to9", with two holes drilled clearance for 5/16" bolts.Frame has three angle brackets, two with 3/4"diameter holes and one with 3/8" diameter hole.Various other holes for shroud, brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack bottom tank
This tank is a mirror image of tank #665, so the rectangular flange is onpassengers side. Learn More -
Mack bottom tank
Tank has a 5" wide x 1" deep cut-out in centre ofheader for power take off, creating two 6 1/8" x12 1/4" header flanges with 22 bolt holes each.Flanges & mounts are the same as #664. Learn More -
Mack bottom tank
This tank has a 1" diameter and a 1 1/4" diameter hose connection, two keyhole brackets that sit low on the tank @ 15 3/4" centers, and two 1/4" NPT flanges. A baffle in the center of the tank splits the radiator front to back. Learn More -
Mack bottom tank
This low flow tank has a baffle splitting the tank front toback, One 1" and one 1 1/4" diameter hose connectioncoming out the bottom on a 90o elbow andfacing passenger side on approximately a 45oangle. Two 1/4" NPT flanges for drains, and twokeyhole type mounting brackets 3" high @ 16"centers of round to round. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection straight out the bottom. The tank slopes from end to hose connection. Learn More