Search results for 'mack'
-
Mack top tankTwo bolt on type flange connections facing enginewith two 3/8" NC threaded holes in each. One 3/4",one 3/8" and two 1/4" NPT flanges facing the engine.Two groups of three 3/8" NC threaded holes neareach end of the tank facing the engine. One hole on toppassenger/engine side for a fill neck.
Note: matches #664 or #664-1 bottom tank. Learn More
-
Mack bottom tankThis tank has two bolt-on type flanges with two 7/16" threadedholes in each, and two mounting brackets with holes @ 8"centers.
Learn More
-
Mack bottom tankThis tank has a 2 1/2" diameter hose connection on the drivers side. The tank slopes from the passengers side to the drivers side.
Learn More
-
Mack bottom tankThis tank is the same as tank #660 except the header is 7/8" wider, andthe mounting brackets are higher.
Learn More
-
Mack bottom tankThis tank has a bolt-on type flange angled at approximately 40 degrees, with four 7/16" NC threadedholes. There are two 5/8" NC mounting holes @ 9" centers.
Learn More
-
Mack bottom tankThis tank has a flange in the center with a 2 3/4" diameter hole andtwo bolt holes with 7/16" NC threads, a flange onthe drivers side with 1 1/2" diameter hole and two 5/16" NCbolt threads, and two mounts with 5/8" NC threads @ 9"centers.
Learn More
-
Mack bottom tankThis tank has a bolt-on type flange on the drivers side with four 3/8"NC threaded holes, a 3/8" NPT fitting in the corner, and a 1" I.D. bushing mount in the center of the tank.
Learn More
-
Mack top tankTwo bolt-on type flanges with two 3/8" NC threadedholes in each. One 1" diameter hose connection. One3/8" and one 1/4" NPT flanges. One 1 3/4" hole ontop for filler neck.
NOTE: the1" diameter hose connection is closed whenshipped. By either cutting open 1" diameter hoseconnection or drilling a series of 3/8" holes in the baffle,this tank can be used in two different models of Macktrucks. Matches model #660 Mack bottom tank. Learn More
-
Mack top tankTwo bolt-on type connections with two 3/8" NCthreaded holes each. One 3/8" NPT flange. One 13/4" hole in top for fill neck. Matches model #662Mack bottom tank.
Learn More
-
Mack top tankTwo flanges with two 7/16" NC threads in each. One1" diameter pipe connection facing the drivers side. Two1/4" and one 3/8" NPT flanges. Three mountingholes with 5/16" NC threads on each end of the tank.One 1 3/4" hole on top for fill neck. Two cut-outson the front.
Learn More