Search results for 'fk33.cc_Magnesium sulphate Exports from China'
-
Kenworth bottom tank
This shallow tank is 1 1/2" deep from end to end. There is a3" diameter hose connection on the passenger side that angles slightly downward at an angle of approximately 10o.
Note: before ordering this tank, compare your sample with tank #608, as these tanks are similar in appearance and can be easily mistaken for each other.
Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection on the drivers side. The tank slopes from the passengers side to the drivers side. Learn More -
Ford side frame
Top flange has 11 bolt holes, five tapped5/16" N.C. and 6 drilled clearance for 5/16" bolts.Bottom flange has 10 holes, 3 are tapped 5/16" N.C.and 7 drilled to clear 5/16" bolts. One bracket 22"from top flange.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Ford side frame
The top flange has 7 holes tapped 5/16"NC and the bottom flange has 5 holes tapped 5/16" NC. There is a mounting pin 15/16" in diameter by 1 5/8" longlocated 5 9/16" up from bottom flange.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Peterbilt top tank
The top part of the tank is 7 1/4" from the edge of the header oneach side. There is a 2 1/2" diameter hose connection, a 1" diameter hose connection, a 3/8" diameter hoseconnection, a 1/4" NPT flange, three 5/16" NCthreaded nuts in the tank, and a 1 1/4" hole on top for filler neck. Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection on the passengers side,and a 1/4" NPT flange. Tank depth tapers frompassengers side to drivers side.Note: matches tank #748 Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection, and a 3/8" NPTflange next to the hose connection. Tank tapers in depthfrom approximately 3 1/4" deep to 3/4" deep.
Note: pairs with tank #750 Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on one end of the tank.
Note: bolt pattern is the same as a #7433 tank
Learn More -
Bus cross-flow
This tank has a 2 1/2" diameter hose connection 9" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the end of the tank.
Note: the bolt pattern is the same as a #7433 tank
Learn More -
GMC top tank
This tank has twenty-five 5/16" NC threaded holes in the built-in baffle, a 1" diameter hose connection straight down fromthe baffle on the passenger side, two bolt-on type flanges with two 3/8" NC threaded holes in each, and two 1/2" a3/8" and a 1/4" NPT flange. The top front corners of the tank are cut lower, and there are two cut-outs across the top of the tank. There is a 1 1/4"hole for a filler neck on the sloped cut-out on the passenger side.
Note : Bolt-on hose connection(s) and/or flat plate(s) available for this tank - must be requested. #7581 - Blank plate #7582 - Plate with 2 1/4" hose connection,2 1/2" long Learn More