Search results for '20 1/4"'
-
Kenworth bottom tankThis tank has a flange in the top center of the tank with four 3/8" NCthreaded holes, a flange on the side with two 5/16"NC threaded holes, and two 5/8" NF mounting holes @8" centers.
Learn More
-
Kenworth bottom tankThis tank is the same as tank #600 except there are no bottommounting holes. The tank tapers more on ends for boltclearance for mounting brackets.
Learn More
-
Kenworth bottom tankThis tank has a bolt-on type flange with two 1/2" NC threadedholes in the middle of the tank, two bolt-on type flanges onthe the grill side with two 5/16" NC threaded holes in each, two bolt-on type flanges on the engine side with two7/16" NC threaded holes in each, and two 5/8" NFthreaded mounting holes @ 8" centers.
Learn More
-
Kenworth bottom tank
This tank has a 3 1/2" diameter hose connection, two bolt-on type connections with two 7/16" NC holes in each, a bolt-on type connection on the grill side with two 3/8" NC holes, and two 5/8" NF mounting holes @ 16" centers.
Learn More
-
Kenworth bottom tankThis tank steps down on each end to accommodatemounting brackets. There is a 2 1/4" diameter hose connectionon the drivers side bent on a 90
o angle topassengers side, and a 1/4" NPT flange on the bottom.
Learn More
-
Kenworth bottom tankThis tank has one flange in the center of the tank with four 3/8" NC bolts.
Learn More
-
Kenworth side frameTop & bottom flanges each have 12 holes (10 drilledclearance for 5/16" bolts and two threaded 5/16" NC). There is aZ shaped bracket on on the back with a 7/8"diameter hole in the center, two brackets on the side with a 3/4" diameterhole in each, two gussets with keyhole type slots forcross bars, seven 1/4" NC threaded holes along each side, and fourteen 1/4" NC threaded holes on the outside.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs.LATE MODEL Learn More
-
Kenworth side frameTop and bottom flanges consist of 10 holes each, allclearance for 5/16" bolts. Various other holes forbrackets, shrouds, etc.
NOTE: Frames are interchangeable.EARLY MODEL Learn More
-
Kenworth side frameConventional style - offset headersTop and bottom flanges each have 10 holes (six clearance for 5/16" bolts and 4 threaded 5/16" NC).There are fourteen 1/4" NC threaded holes on the side forbrackets and shroud, and two brackets onthe side each with a 3/4" diameter hole.
Note: frames are not interchangeable. Orderleft for drivers side or right for passengers side orpairs.LATE MODEL Learn More
-
Kenworth side frameTop and bottom flanges have 10 holes each (eight clearance for 5/16" bolts and two threaded 5/16" NC).There are 26 holes on the back threaded 1/4"NC. The grill side is cut lower to allowmore air flow, the engine side is 2" deep.
Note: Frames are interchangeable if there is no Z bracket. If a Z bracket is required frames would notbe interchangeable.LATE MODEL Learn More