Search results for '20 1/4"'
-
Western Star side frameTop & bottom flanges have 12 holes in each, 4 tapped5/16" N.C. threads and 8 drilled clearance for 5/16"bolts. Four 1/4" N.C. threaded holes in each side ofchannel. Ten 3/8" N.C. threaded holes on back ofchannel. ( 1 group of 4; 1 group of 6) Gussets haverectangular cut-outs for tube access.NOTE: Side frames are interchangeable.
Learn More
-
Western Star side frameTop and bottom flanges each have 12 holes, 4 tapped5/16" N.C. threads and 8 drilled clearance for 5/16". Mtg. bosses for cross bars.bolts. Each side of channel has 4 - 1/4" N.C. threadedholes. Back of channel has ten 3/8" N.F. threadedholes. NOTE: Side frames are interchangeable.
Learn More
-
Kenworth top tankThis tank has two 3" diameter hose connections facing straight outtowards the engine, a 1" diameter hose connection onthe passenger side angled down towards the engine, three1/4" NPT flanges, a bracket on top, a hole ontop for filler neck toward driver side of center, and the topof the tank slopes down on front & driver's side.
Note: the two 3" diameter hose connections are closedwhen shipped. Desired connection(s) must be openedat time of installation. This can be done by means of ahacksaw. Learn More
-
Kenworth top tank
This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, three 1/4" NPT flanges, a bolt-on type filler at the top center, a bracket at the center facing the engine.
Note: the 3" diameter hose connections are closed when shipped. The desired connection must be opened before installation (this can be done with a hacksaw). Learn More
-
Kenworth top tankThis tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection on the passenger side, three 1/4"NPT flanges, a bracket in the center facing the enginewith a clearance hole for a 1/2" bolt, and a 1 3/4" holeon top for a filler neck.
Note: Two 3" O.D. hose connections are closed whenshipped. Desired connection(s) must be opened attime of installation. this can be done by means of ahacksaw. Learn More
-
Kenworth top tankThis tank has a 2" diameter hose connection near the center of the tank, a1" diameter hose connection, two 1/4" NPT flanges, two bolt-on type filler necks ( one on top and one onthe slanted front), and two mounting brackets - one on topand one on the bottom.
Learn More
-
Kenworth top tankThis tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, two 1/4" NPT flanges, amounting bracket, a bolt-on type filler on the slantedpart of the top.
NOTE: Two 3" diameter hose connections are closedwhen shipped. Desired connection(s) must be openedat time of installation. This can be done by means of ahacksaw. Learn More
-
Kenworth top tankThis tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, three 1/4" NPT flanges, abolt-on type filler on the slanted part of the top, and amounting bracket.
NOTE: Two 3" diameter hose connections are closedwhen shipped. Desired connection(s) must be openedat time of installation. This can be done by means ofa hacksaw. Learn More
-
Kenworth top tankThis tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection on the passenger side, three 1/4"NPT flanges, a bracket on top, and a 1 3/4" holeon the front slant part of the tank for a filler neck.
NOTE: Two 3" diameter hose connections are closedwhen shipped. Desired connection(s) must be openedat time of installation. This can be done by means of ahacksaw. Learn More
-
Kenworth top tankThis tank has a 2 1/2" diameter hose connection on the passenger's side, three 1/4" NPT flanges facing the engine, a bracketon top, a hole for filler neck on top front corner, and the driver's side of the tank is cut lower to accommodate an airto air cooler hose.
Learn More
