Search results for 'VOLVO'
-
Volvo solder-on tank set
These tanks have a 1/4" NPT flange at each end, and the bottom has a 1" diameter hose connection, a 1 1/4" diameter hose connection, with a baffle separating them.
Learn More -
Volvo Loader solder-on tank
This tank has a 2 1/4" diameter hose connection, and a 14mm x 1.5mm flange for a drain assembly. The cross section of the tank is semi-circular.
Learn More -
Volvo / Autocar top/bottom tank
This tank has a 2 1/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the pipe, a 1/4" NPT flange for an expansion fitting, and three 5/16" NC threaded nuts under the hose connection instead of bolt holes. Learn More -
Volvo bolt-on bottom tank
This tank has a 2 1/2" diameter hose connection 6 1/2" from the edge of the tank to the center of the hose connection, slightly offset from dead center, facing downward. There is one large mounting bracket 5 1/2" tall with a pair of 5/8" NC threaded bolts @ 8" centers. Learn More -
Volvo Loader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
Volvo Loader bottom tank
This tank has a 2 1/2" diameter hose connection, and a 1/2" NPT coupling for a drain.
Learn More -
Volvo Surge tank
This tank is divided into two compartments.
It has a 1 1/4" diameter bypass hose, a 1 3/8" diameter hole for a filler neck (this replaces the screw-on fill cap on the original plastic tank), two 3/8" diameter hose connections, a 3/4" NPT coupling (replaces original sensor fitting), two mounting brackets on each side, a 1/4" NPT flange on the "surge" half of the tank (replaces the screw-on type fitting), and a 1/2" NPT "clean out" hole (designed in to enable to clean out debris caused in the manufacturing process).
Original part# Volvo VN D16 07/09
Learn More -
Volvo Mack solder-on kit
These tanks have 2 1/2" diameter hose connections, two mounting bosses on each end to attach side frames, and four 1/4" NC threaded blocks on the grill side. The top tank has four 1/4" NC threaded blocks on the top, and a 1/4" NPT flange for an expansion fitting. The bottom tank has a 22mm flange for a quick fill line, and two holes @ 11 1/2" centers to accommodate an oil cooler.
Note: this is the brass version of tank set #2403CK.
Learn More -
Volvo solder-on side frame
This frame must be ordered either left or right (not interchangeable).
The left has two 1/4" NC threaded holes, and two mounting studs @ 10 1/4" centers. The right has three 1/4" NC threaded holes, and two mounting studs @ 13 1/4" centers.
Learn More -
Volvo bolt-on tank (1940)
This tank has two 5/8" NF mounting studs 3" long @ 9 1/2" centers, a bolt-on style flange, and a PTO hole through the center.
SAMPLE REQUIRED
Learn More
Recently Viewed Products
My Quote
You have no items in your quote.