Search results for '29 1/8" x 3"'
-
International top tankThis tank has two bolt-on flanges with two 3/8" NCthreads, a bolt-on type filler with four 5/16" NCthreads., a 3/4" a 1/2" two 3/8" and one 1/4"NPT flanges, and a built-in baffle.
Learn More
-
International top tankThis tank has two bolt-on flanges with two 3/8" NC threaded holes ineach, two 3/8" NPT flanges, two round brackets, a bracket on top, a 1 3/4" hole on top for a fillerneck, a flange in the built-in baffle with two 5/16"NC threads, and a bar on the built-in baffle with five5/16" NC threaded holes.
Learn More
-
International top tankThis tank has twenty 5/16" NC threads in the built-in baffle, a 21/4" diameter hose connection on the drivers side, a 1" diameter hose connection coming out of the baffle on the passenger side, a 1 3/4" pipe on the front for a filler neck, three1/4" NPT flanges, and two brackets fitted on the top.
Learn More
-
International top tankThis tank has sixteen 5/16" NC threaded holes in the built-in baffle, a 2 1/4" diameter hose connection on the drivers' side, a 1" diameter hose connection on the passenger side, a 1 3/4"diameter pipe on the front for a filler neck, and three 1/4" NPTflanges.
Learn More
-
International top tankThis tank has two 1 1/2" diameter 90
o elbows facing down andslightly out on each end, a 1" diameter hoseconnection, a 1/2" and 3/8" NPT flanges, fifteen 5/16" NC threaded holes in the built-in baffle, and a 1 1/4" hole for a filler neck on top on the passenger side.
Learn More
-
International top tankThis tank has a 2 1/2" OD hose connection at the center, a 3/4" a 1/2" and a 1/8" NPT flange, fifteen 5/16"NC threaded holes in the built-in baffle, and a 1 1/4" holefor a filler neck on top on the drivers side.
Learn More
-
International top tankOne 2 1/2" O.D. hose connection in centre. One 1"O.D. 90 degree hose connection on passengers side.One 1/8" N.P.T. fitting. One 1 1/4" hole on toppassengers side for filler neck. Built-in baffle.
Learn More
-
International cross flow tankThis tank has a 2 3/4" diameter hose connection that bends 90
o on approximately a 45
o angle, a 3/8" NPT flange on each end of the tank.
Learn More
-
International cross flow tankThis tank has a 2 1/2" diameter hose connection with a 45
o elbow that points upwards.
Note: if you need this tank with an oil cooler, order tank #6381. Learn More
-
International top tankThis tank has two bolt-on flange connections with two 3/8" NC threadedholes in each, two 1/4" and one 3/8" NPT flanges, a 1/2" NPT flange on the front facing the engine, a 13/4" filler hole on the top drivers' side, a 1/2" NPTflange on the drivers' side, and a flange on bottom withtwo 5/16" NC threaded holes.
Note: matches bottom tank #642. Learn More