Search results for 'the'
-
International top tank
This tank has two bolt-on flanges with two 3/8" NC threaded holes ineach, two 3/8" NPT flanges, two round brackets, a bracket on top, a 1 3/4" hole on top for a fillerneck, a flange in the built-in baffle with two 5/16"NC threads, and a bar on the built-in baffle with five5/16" NC threaded holes. Learn More -
International top tank
This tank has twenty 5/16" NC threads in the built-in baffle, a 21/4" diameter hose connection on the drivers side, a 1" diameter hose connection coming out of the baffle on the passenger side, a 1 3/4" pipe on the front for a filler neck, three1/4" NPT flanges, and two brackets fitted on the top. Learn More -
International top tank
This tank has sixteen 5/16" NC threaded holes in the built-in baffle, a 2 1/4" diameter hose connection on the drivers' side, a 1" diameter hose connection on the passenger side, a 1 3/4"diameter pipe on the front for a filler neck, and three 1/4" NPTflanges. Learn More -
International top tank
This tank has two 1 1/2" diameter 90o elbows facing down andslightly out on each end, a 1" diameter hoseconnection, a 1/2" and 3/8" NPT flanges, fifteen 5/16" NC threaded holes in the built-in baffle, and a 1 1/4" hole for a filler neck on top on the passenger side. Learn More -
International top tank
This tank has a 2 1/2" OD hose connection at the center, a 3/4" a 1/2" and a 1/8" NPT flange, fifteen 5/16"NC threaded holes in the built-in baffle, and a 1 1/4" holefor a filler neck on top on the drivers side. Learn More -
International cross flow tank
This tank has a 2 3/4" diameter hose connection that bends 90o on approximately a 45o angle, a 3/8" NPT flange on each end of the tank.
Learn More -
International top tank
This tank has two bolt-on flange connections with two 3/8" NC threadedholes in each, two 1/4" and one 3/8" NPT flanges, a 1/2" NPT flange on the front facing the engine, a 13/4" filler hole on the top drivers' side, a 1/2" NPTflange on the drivers' side, and a flange on bottom withtwo 5/16" NC threaded holes.
Note: matches bottom tank #642. Learn More -
International bottom tank
This tank has two rectangular flanges with four 3/8" NC threadedholes in each, two mounting brackets with a 1/2"NC threaded hole in each, and one 1/4" NPT flange. The tankdips in the middle between the brackets to allow for a PTO. Learn More -
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, and two bottom mounting holes @ 25 1/4" centers. Twocorners on the header are rounded off. Learn More -
International bottom tank
This tank has a 2 1/2" diameter hose connection facing the engine, a1/4" NPT flange on the rise of the tank.
Note: this tank is the mirror image of tank #643C ( 2 1/2" hoseconnection on other side) with one less fitting at end. Learn More