Search results for '708'
-
Mack bottom tank
This tank has a flange in the center with a 2 3/4" diameter hole andtwo bolt holes with 7/16" NC threads, a flange onthe drivers side with 1 1/2" diameter hole and two 5/16" NCbolt threads, and two mounts with 5/8" NC threads @ 9"centers. Learn More -
Peterbilt top tank
The top part of the tank is 7 1/4" from the edge of the header oneach side. There is a 2 1/2" diameter hose connection, a 1" diameter hose connection, a 3/8" diameter hoseconnection, a 1/4" NPT flange, three 5/16" NCthreaded nuts in the tank, and a 1 1/4" hole on top for filler neck. Learn More -
Peterbilt bottom tank
This tank has a 3" diameter hose connection facing to ground.
Note: this tank pairs with top tank #708.
Learn More -
Peterbilt top tank
This tank has a 2 1/2" diameter hose connection, and two 1/4" NPT flanges 7" and 3" from the end of the tank.
Note: this tank is identical to tank #7082, except it has a 2 1/2" hose connection instead of a 3" hose connection. Learn More -
Peterbilt top tank
This tank has a 3" diameter hose connection, and two 1/4" NPT flanges 7" and 3" from the end of the tank.
Note: this tank is identical to tank #7081, except it has a 3" hose connection instead of a 2 1/2" hose connection.
Learn More -
-
Peterbilt bottom tank
This tank has a 3" hose connection, 11 1/2" from the edge of the tank to the center of the hose connection. The connection comes first straight down out of the tank, then bends at 90 degrees to face the engine. This tank is similar to the 7195, except that the hose connection does not sweep upward.
Note: this tank shares the bolt hole pattern with tank #719 and tank #708.
Learn More -
Case solder-on tank kit
These tanks have 1 1/2" diameter hose connections, a 1/4" NPT flange for a drain/expansion fitting, and mounting brackets on each end.
Individual tanks #4207 and #4208.
Learn More -
Woodchipper Complete Set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Thisset comes with a fan shroud 42" high, 37" wide, 2 7/8" deep, with a 31"diameter hole. Four washer bars also supplied 27 7/8" long with 14bolt holes. Learn More -
Peterbilt top tank
This top tank is the same as tank #708, except that the filler neck hole and the slope of the tank is on the opposite side.
Learn More