Search results for 'John Deere'
-
John Deere 540B Skidder solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection, two holes for the oil cooler (one on the grill side and one on the fan side), and a 1/4" NPT flange for a drain fitting on the grill side.
Note: oil cooler must be supplied by the customer.
Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers. Learn More -
Case solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange for a sight glass, two mounting brackets, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two mounting brackets, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a hole for a filler neck, a 1/8" NPT fitting, two 1/4" NC threaded holes on the fan side, a 2 1/4" diameter hose connection, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, a 18mm x 1.5mm threaded boss for a sensor, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange on the grill side for a drain fitting.
Learn More -
This shroud has been modified as per customer instruction.
Learn More -
John Deere tank
This bottom tank has a 2 3/4" diameter hose connection 6 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom 9" from the edge of the tank, and 2 large mounting brackets at the back.
Front and back views shown here.
Learn More -
Case solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a stand pipe for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the hose connection for a drain fitting.
Learn More -
John Deere solder-on tank
This tank has a 2" diameter hose connection on the driver's side 2 3/8" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank 4 3/4" from the edge of the tank.Front and back views shown here.
Learn More -
Case solder-on tank set
Top Tank
This tank has two 2 1/4" diameter hose connections, a deairation baffle, and a 1 3/4" diameter hole for a fill neck.
Bottom Tank
This tan has a 2 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 1418PC plate oil cooler.
Learn More