Search results for 'John Deere'
-
Case Loader Set - Available in brass (9709) or steel (2104CK)
Top Tank
This tank has a 1 3/4" diameter hose connection (1 3/4" long) 3 3/4" from the edge of the tank to the center of the hose connection, a 1 3/8" diameter pipe facing upward just behind the hose connection to accommodate the fill neck, and four 5/16" NC threaded nuts for the side frames to mount to.
Bottom Tank
This tank has a 2 1/4" diameter hose connection (1 3/4" long) 3 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" NC threaded nuts for the side frames to mount to.
Note: #9709 brass set comes with a #1002 Ford fill neck, and a 1/4" NPT drain cock. With #2104CK steel set the fill neck is sold separately.
Steel Kit #2104CK shown here.
Learn More -
Case solder-on tank set
Top tank has a 1 3/8" diameter hose connection, and the bottom tank has a 1 1/2" diameter hose connection and a 1/4" NPT flange for a drain. Mounting brackets on each end.
Individual tanks #4163 and #4244.
Learn More -
Case 7120 Tractor solder-on tank kit
These tanks have 2 1/4" diameter hose connections and steel brackets on the backs. The top tank has a raised filler neck, and the bottom tank has mounting studs. Various 1/4" NPT flanges for drain/expansion fittings.
Individual tanks #4153-S and #4154-S Learn More -
Case Solder-on Kit
Top Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a fill neck attached on top of the hose connection.
Bottom tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4256 and #4257.
Learn More -
Case Solder-on Kit
Top Tank
This tank has a 2" diameter hose connection, two mounting bosses with rubber inserts, and a filler neck on the top driver side.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4260 and # 4261.
Learn More -
John Deere solder-on tank kit
These tanks have 1 1/2" diameter hose connections. The inlet tank has a 1/4" NPT flange for a drain, and the outlet tank has a filler neck.
Individual tanks #4174 and #4175.
Learn More -
John Deere kit
These tanks have 2 1/2" diameter hose connections with a 1/4" flange for a drain cock on the bottom tank's connection. There is a steel bracket on the tanks with a clamp reinforcing the hose connections.
Individual tanks #4147 and #4148.
Learn More -
John Deere solder-on kit
These tanks have 2 1/4" diameter hose connections, and one tank has a steel bracket on the back.
Individual tanks #3070 and #3071.
Learn More -
John Deere solder-on tank kit
The top tank has a 2 1/4" diameter hose connection, a filler neck, and a 1/4" NPT flange for an expansion fitting. The bottom tank has a 2 1/2" diameter hose connection, a 3/4" connection, and a 1/4" NPT flange for a drain. Each tank has a mounting boss with a rubber insert at each end.
Individual tanks #4262 and #4263.
Learn More -
Case solder-on tank kit
These tanks are a mirror image of each other. They have 1 3/4" diameter hose connections, and a mounting boss with a rubber insert on each end.
Individual tanks #4288 and #4289.
Learn More