Top Tank
-
Forklift solder on top tank
This tank has a 1 1/4" diameter hole for a filler neck, and a 1 3/8" diameter hole for a hose connection. Learn More -
Gen Set solder-on top tank
This tank has a 2 1/2" diameter hose connection, a hole for a filler neck, and two 1/4" NPT flanges.
Learn More -
Case Loader solder-on top tank
This tank has a 2 1/4" hose connection 7 1/4" from the edge of the tank to the center of the hose connection.
Learn More -
1918 Fire Truck solder-on top tank
This tank has a 2 1/2" diameter stand pipe for a filler neck, a threaded flange connection, four brackets with slotted holes to latch to the hood, and a PTO through-hole.
Learn More -
Gen Set solder-on top tank
This tank has a 1 3/4" diameter hose connection, and a stand pipe for a fill neck.
Learn More -
Solder-on Top Tank
This tank has a 3/4" diameter bypass hose connection in the center of the tank, a pair of 1/2" NPT flanges for sight glasses on the right side of the tank, a 2 1/4" diameter hose connection below the baffle on the left side of the tank, a truck fill neck hole in the top center of the tank, and a 1/4" NPT flange between the fill neck hole and the left side of the tank. Learn More -
Solder-on top tank
This tank has a 2" diameter hose connection, a 1" diameter bypass connection on a 90o angle, a deairation baffle, a 1/4" NPT flange, and a 1 3/4" diameter hole in the top center for a filler neck.
Learn More -
Takeuchi Excavator
Top Tank
This tank has two brackets, two 1/4" threaded nuts on each end, a 1 1/4" diameter hose connection, and a 1 1/8" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, two 1/4" threaded nuts on each end, a PTO cutout, two mounting pins @ 12 1/2" centers, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on Top Tank
This tank has a 1 1/2" hose connection, a 3/8" NPT flange for a sensor, and a 1 3/4" diameter hole on the top center for a fill neck. The inside of the tank contains a deflection baffle.
Learn More -
Gen Set solder-on top tank
This tank has a 2" diameter hose connection, a hole on top for a filler neck, and a 3/8" NPT flange.
Learn More