Side Frame
-
Cat side rails L&R, 45", 12" channel width, rails are not interchangeable also come in 51" length Learn More -
Orion 5 side frame
This frame has eight 3/8" NC threadedholes and two 1/4" threaded holes along each edge, and a mountingbracket on the back of the frame. Learn More -
New Flyer Bus side frame
This frame has twelve 3/8" NC threaded holes and eight 5/16" NC threaded holes on the back of the rail, and seven 5/16" NC threaded holes along each edge. Flanges have eight holes each (four of them threaded 5 /16" NC).
Learn More -
Peterbilt side frame
Top and bottom flanges each have 12 holes, ten drilledclearance for 5/16" bolts and two tapped 5/16" NC.One bracket on side of channel near top with twoholes drilled clearance for 1/2" bolts. Angle bracketson each side of channel with 1/4" NC threaded holes.
Note: frames are not interchangeable. Order left or right accordingly.
Learn More -
Mack side frame
These frames have three 5/16" NC threaded holes along the grill side of the frame, and eight 5/16" NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header.
Note: order Left or Right as these frames are not interchangeable.
These frames match with tank #6626.
Learn More -
International cross flow frame
This frame has five 5/16" NC threaded holes along the fan and grill side for fan guard mounting, and six 3/8" NC threaded holes along the back of the frame for mounting the radiator. Each flange has 10 bolt holes.
Note: this frame matches tank #6408 and tank #6409.
Learn More -
International side frame
This frame has a large mounting bracket on the back of the frame slightly off center, four 3/8" NC threaded holes on each side of the frame, and four 5/16" NC threaded studs along the side of the frame.
Note: this frame matches tank #6471 and tank #6472.
Learn More -
Kenworth side frame
This frame has 12 bolt holes per flange (two threaded 5/16" NC), and various brackets along the back of the frame for mounting a variety of attachments (CAC, condensers, etc...), and there are "ears" on the gussets for mounting an oil cooler.
Note: this frame matches with tank #5911 and tank #6024.
Learn More -
AutoCar side frame
This frame is 37 7/8" long. It is similar to frame #526, except that there is less of an overhang, and there is an additional bracket welded on the side.
There are twelve 3/8" NC threaded nuts on the back of the frame for mounting purposes. Left and right are mirror images of each other.
This particular frame belongs to an Auto Car garbage truck.
Learn More -
Western Star side frame
This frame has a 5/16" NC threaded nut in each gusset, two "ears" with 3/8" threaded nuts to mount CAC, two 1/4" NC threaded holes along the same edge of the "ears" and four !/4" NC threaded holes along the opposite edge, and 14 3/8" NC threaded holes an the back of the frame.
The flanges have 12 bolt holes - eight 3/8" diameter clearance holes, and four 5/16" NC threaded holes.
Learn More