Solder on Tanks
-
Cat solder-on tank
This tank has a 2" diameter hose connection, a 3/8" NPT flange for a drain, and a 1216PC plate oil cooler that replaces the 10 plate 15 1/2" center oil cooler.
Learn More -
Komatsu bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and holes @ 19" centers for an oil cooler. Learn More -
Case solder-on bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, a pair of 3/8" NC threaded studs @ 17 3/8" centers (offset towards the grill side), and mounting blocks on each end with two 5/16" threaded holes.
Learn More -
Solder-on bottom tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a PTO hole through the center of the tank.
Note: samples are required to build this tank.
Learn More -
Cat solder-on bottom tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange on the grill side.
Learn More -
Solder-on Bottom tank
This tank has a 2 1/4" diameter hose connection, two holes for an oil cooler, and a 1/8" NPT flange for a drain fitting.
Oil cooler is 7 1/8" centers - holes are 1 7/16" dia.
Learn More -
Solder-on Bottom Tank
This tank has a 1 1/2" diameter hose connection, and a ten plate oil cooler with 18" centers (1018PC).
Learn More -
Solder-on bottom tank
This tank has a 1 1/4" diameter hose connection, two mounting holes with 3/8" NC threaded nuts @ 16 3/8" centers, a PTO cutout (original tank did not have this), and a 1/4" NPT flange for a drain fitting.
Front and back view shown here.
Learn More -
Gen Set solder-on bottom tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two 3/8" NC threaded studs @ 16 1/2" centers.
Learn More -
Case Dozer bottom tank
This tank has a 2 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More