Side Frame
-
Nova Bus side frame
This frame has a length of 29 9/16". It has six 3/8" NC threaded nuts along each side, an angle on the back,a slotted hole on the back, and an inner channel. Learn More -
Nova Bus Side Frame
This frame has two bosses for crossbars, two 5/16" NC and one 3/8" NC threaded holes along one edge, a5/16" NC and a 3/8" NC threaded hole along the opposite edge, eight3/8" NC threaded holes along the back of the frame, and a slotted holein the back. Learn More -
Champion Grader side frame
This frame has six 3/8" NC threaded holes (3 on the fan side, 3 on the grill side), and four 3/8" diameter by 3/4" long slotted holes.
Learn More -
Cat side frame
Flange has 10 bolt holes, and there are five 3/8" NC nuts along the edge of the frame. Frame has an inner channel.
Learn More -
Bolt-on Side Frame
This frame has four 5/16" NC threaded holes, four 1/4" NC threaded holes, an inner channel, two clearance holes to bolt to the top tank, and two slotted holes to bolt to the bottom tank.
Learn More -
Gen Set side frame
This frame has an angle with four 3/8" threaded nuts. One frame has a mounting ear with a 3/8" slotted hole, and the other frame has two mounting ears with a 3/8" slotted hole.
Learn More -
Case side frame
This frame has five 5/16" NC threaded holes along the back of the frame, and an angle on the side of the frame with 5 clearance holes.
Learn More -
Case side frame
This frame has seven 5/16" NC threaded holes along the edge of the frame, and nine 5/16" threaded holes along the opposite edge of the frame.
Learn More -
New Flyer Bus Top and Bottom Frames
Each frame has five 5/16" NC threaded holes along one edge of the frame, six 5/16" C threaded holes along the opposite edge, eight 5/16" NC threaded holes along the back of the frame, and four notches on the edges.
Frame #042009A is manufactured with 10 gauge material, and frame #042009B is manufactured with 3/16" material.
Matches with tank #7435.
Learn More -
Ottawa Shunt Truck side frame
This side frame has eight 5/16" NC threaded nuts along the back, and a 1/2" thick block with eight 3/8" NC threaded holes to attach mounting bracket #042810F.
Bolt pattern matches #041408A.
Learn More