Search results for '679'
-
Mack top tank
This tank has a 2" diameter hose connection on the driver sideof center, a 3/8" and a 1/8" NPT flange on the front, a 1 1/4" hole ontop for filler neck, two 5/16" NC threaded holes onthe top of tank @ 21 1/2" centers, and four small holes that drain the surge tank into the header. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection on the drivers side facingthe engine on slightly less than 90o. The tank is only 1 1/2"deep. there is a mounting bracket on the tank 6" high withtwo 5/8" diameter holes @ 8" centers. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection on the drivers side facing the engine, a 3/8" NPT flange on the bottom, and two keyhole type mounting brackets on the bottom. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection on the drivers sidefacing the engine, a 3/8" NPT flange on the bottompassengers side, and a mounting bracket 26 3/4" long. Learn More -
Mack bottom tank
This tank has a 3 1/2" diameter hose connection straight out thebottom approximately 16" in from end, a 3/8"NPT fitting on the bottom, and two keyhole type mountingholes 19 1/2" from the end of one key to the end of the other. Learn More -
Mack side frame
Each flange has 10 holes, four tapped 5/16" NC anddrilled clearance for 5/16" bolts. One angle bracketwith a 3/8" slotted hole 7 3/4" down from end. Oneangle bracket with a 3/8" hole 10 1/4" from end tocenter. Two 5/16" NC holes on back of channel.Five 5/16" NC holes on one side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top and bottom flanges each have 7 holes, 4 tapped5/16" NC and 3 drilled clearance for 5/16" bolts.Two sleeves for cross bars welded to gussets. Total of31 - 5/16" NC threaded holes on channel, 5 on oneside, 6 on other side and 20 on flat side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs.
Left shown here.
Learn More -
Mack side frame
Top & bottom flanges each have 7 holes, 4 tapped5/16" NC threads and 3 drilled clearance for 5/16"bolts. Two sleeves for cross bars welded to gussets.Total of 36 - 5/16" N.C. threaded holes on channel, 5on engine side, 9 on grille side and 22 on flat side ofchannel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack Titan top tank with built-in surge tank
This tank has a 2 1/2" diameter hose connection, a 1 1/4" diameter hole in top for a fill neck, a 1/4" NPT flange on the face of the surge tank, a 3/8" diameter fitting on the face of the surge tank underneath the 1/4" flange, and two 3/4" NPT fittings to accommodate a 1" diameter bypass fitting. This tank is de-airated.
Note: this tank's bolt hole pattern matches tank #679.
Front and bottom views shown here.
Learn More -
Mack Superliner top tank with surge tank
This tank has a 2 1/2" diameter hose connection, a 1 1/4"diameter hole in the top for a filler neck, a 1/4" NPT fitting on the face of the surge tank, a 3/8" NPT fitting underneath the 1/4" fitting, and two 3/4" NPT fittings to accommodate a 1" diameter bypass. This tank is de-airated.
Note: this tank shares the bolt pattern with tank #679.
Front and bottom views shown here.
Learn More