Bottom Tank
-
International bottom tank
This tank has a 1 1/4" diameter hose connection straight out towards theengine, a 1" diameter hose connection on a 90oangle facing the engine 5 1/4" from the driver's side of the tank, a baffle in the tank approx. 1/2"off center that splits the tank left to right, and a 1/4" NPT flange on the shallow endof the tank. Learn More -
International bottom tank
This tank has a 2 1/2" diameter hose connection facing the engine, a1/4" NPT flange on the rise of the tank.
Note: this tank is the mirror image of tank #643C ( 2 1/2" hoseconnection on other side) with one less fitting at end. Learn More -
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, a flange on the side of the rectangular flange housing withtwo 5/16" NC holes, and two bottom mounting holes @ 25 1/4 centers. Two corners on the header arerounded off. Learn More -
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, and two bottom mounting holes @ 25 1/4" centers. Twocorners on the header are rounded off. Learn More -
International bottom tank
This tank has two rectangular flanges with four 3/8" NC threadedholes in each, two mounting brackets with a 1/2"NC threaded hole in each, and one 1/4" NPT flange. The tankdips in the middle between the brackets to allow for a PTO. Learn More -
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, and two bottom mounting holes @ 26 5/8" centers. Learn More -
Kenworth bottom tank
Optional low flow to tank #610LF. Tanks areidentical except the baffle on #612LF splits theradiator left to right ( #610LF baffle splits tank front toback). Learn More -
Kenworth bottom tank
Single pass, low flow conversion tank. One flangeconnection with two 3/8" NC threaded studs at 2 5/8"centers. One 3/8" NPT fitting. Learn More -
Kenworth bottom tank
This tank has a flange on the bottom with two 3/8" NC threadedstuds, a 1" diameter hose connection on the drivers sidebending on a 90o angle to the passenger side, and two 1/2" NPT flanges. A baffle divides the tank lengthwise down the center. Learn More -
Kenworth bottom tank
This tank has one flange 10 1/2" from the end of the tank to the center of the flange with four 3/8" NC bolts. Learn More