Bottom Tank
-
Kenworth bottom tank
This tank has one flange in the center of the tank with four 3/8" NC bolts. Learn More -
Kenworth bottom tank
This tank has a 2 1/2" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection. This tank is identical to tank #6081, except the hose connection is smaller and angles downward more.
T600 Kenworth
Learn More -
Kenworth bottom tank
This tank has a 3" diameter hose connection on the passenger side, pointing slightly downward on an angle of approximately 10o. The hose connection is 4" long at the longest edge - If your tank's hose connection is longer than this, you may need tank #608 - check carefully.
Learn More -
Kenworth bottom tank
This tank has a 3" diameter hose connection on the passenger sidethat slants slightly downwards at an angle of approximately 10o. This hose connection is 6" long. If a shorter hose connection is required, compare your sample with tank #6081, which has a hose connection of only 4" long.
Learn More -
Kenworth bottom tank
This tank has a 2 1/2" hose connection that sweeps upwards towards the engine, and a 1/2" NPT flange on the bottom of the tank centered towards the grill side.
Note: intended for CAT engine application.
Learn More -
Kenworth bottom tank
Tank steps down on each end to accommodatemounting brackets. There is a 2 1/2" diameter hose connectionon the driver side bent on a 90o angle towards thepassenger side, and a 1/4" NPT fitting on the bottom.
This tank is the same as tank #607, except for the larger hose connection.
Learn More -
Kenworth bottom tank
This tank steps down on each end to accommodatemounting brackets. There is a 2 1/4" diameter hose connectionon the drivers side bent on a 90o angle topassengers side, and a 1/4" NPT flange on the bottom. Learn More -
Kenworth bottom tank
This shallow tank is 1 1/2" deep from end to end. There is a3" diameter hose connection on the passenger side that angles slightly downward at an angle of approximately 10o.
Note: before ordering this tank, compare your sample with tank #608, as these tanks are similar in appearance and can be easily mistaken for each other.
Learn More -
Kenworth bottom tank
This tank has a bolt on connection in the center of the tank with four 3/8" NC studs, two 5/8" NF mounting studs at 16" centers, and a shutterflange on the side of the tank. Learn More -
Kenworth bottom tank
This tank has a 3 1/2" diameter hose connection, two bolt-on type connections with two 7/16" NC holes in each, a bolt-on type connection on the grill side with two 3/8" NC holes, and two 5/8" NF mounting holes @ 16" centers.
Learn More