Bottom Tank
-
Mack bottom tank
This tank has two bolt-on type flanges with two 7/16" threadedholes in each, and two mounting brackets with holes @ 8"centers. Learn More -
International bottom tank
This low flow tank has one 1 1/4" diameter hose connection, and one 1" diameterhose connection 3" apart coming out on the passenger side. There are three 1/4" NPT flanges (2 on the tank and one onthe 1 1/4" hose connection), and a baffle splitting the tankfront to back. Learn More -
International bottom tank
This tank has a 2 1/2" diameter hose connection on on the passenger side ofthe tank facing up and out at approximately 45 degrees, a 1/4" NPT flange on drivers side, and a 1/8"NPT flange on the bottom. Learn More -
International bottom tank
This tank has a 2 1/2" diameter hose connection on the passengers side, and a 1/4" NPT flange in the center of the tank.
Learn More -
International bottom tank
This tank has a rectangular flange with four 3/8" NC holes, a flange on the side of the rectangular flange housing withtwo 5/16" NC holes, and two bottom mounting holes @ 25 1/4" centers. Two corners on the header arerounded off. Learn More -
International bottom tank
This tank has one rectangular flange with four 3/8" NC holes, and two bottom mounting holes at 25 1/4" centers. Twocorners on the header are rounded off. Learn More -
International bottom tank
This tank has a 1 1/4" diameter hose connection on the passengers side, a 1" diameter hose connection on a 90 degree angle5 1/4" from the drivers side facing to the center on a 45degree angle, and two 1/4" NPT flanges. There is a bafflesplitting the tank left to right. Learn More -
International bottom tank
This tank has a 1 1/4" diameter hose connection on the passengers side, a 1" diameter hose connection on a 90 degree angle8 1/4" from the drivers side facing to the center on a 45degree angle, and two 1/4" NPT flanges. There is a bafflesplitting the tank left to right. Learn More -
International bottom tank
This tank has a 2 1/2" diameter hose connection on the passengers sideof center, and a 1/4" NPT flange. The tank is shallowexcept where the hose connection and flange are located. Learn More -
International bottom tank
This tank has a 1 1/4" diameter hose connection straight out towards theengine, a 1" diameter hose connection on a 90oangle facing the engine 8 1/4" from the driver's side of the tank, a baffle in the tank approx. 1/2"off center that splits the tank left to right, and a 1/4" NPT flange on the shallow endof the tank.
Note: this tank is a mirror image of tank #643-2LF Learn More