Top Tank
-
International top tank
This tank has two bolt-on flanges with two 3/8" NCthreads, a bolt-on type filler with four 5/16" NCthreads., a 3/4" a 1/2" two 3/8" and one 1/4"NPT flanges, and a built-in baffle. Learn More -
International top tank
This tank has two bolt-on flanges with two 3/8" NC threadedholes in each, a 1/4" and a 1/2" NPT flangefacing engine, a 5/8" OD hose connection onthe lower passenger side facing engine, a hole on the topslope for a filler neck, a bolt on type flange on the frontdrivers side, a 1/2" NPT flange on the front driversside, and a bolt on type flange in the baffle. Learn More -
International top tank
This tank has a 1/4" NPT flange facing the engine, a 3/8"NPT flange on the end on the passenger side, a 1/4" NPTflange on the end on the drivers' side, a 3/4" and two 1/4"NPT flanges on top, and a hole on the top for a filler neck, a 1" hose connection out the baffle onthe passenger side angled towards the passenger end of the tank. and fifteen 5/16" NC threaded holes in the baffle.
(Note: one 3/4" NPT fitting goes through thetank.)
Learn More -
International top tank
One 2 1/4" O.D. hose connection in center facingengine. Two 1/8" N.P.T. fittings on top. One hole forfiller neck on top. One 3/8" N.P.T. fitting on passengerend of tank. One 1" O.D. hose connection out baffleon passenger side - angled to passengers end of tank.Fifteen 5/16" N.C. threaded holes in baffle. Learn More -
International top tank
This tank has two bolt-on flanges with two 3/8" NC threadedholes in each, a 3/8" NPT and one 1/4" NPT flangefacing the engine, a 1/2" NPT flange on the grille side, a bolt-on flange connection on the baffle with two 5/16" NCthreaded holes, and a hole for a filler neck on the top frontedge. Learn More -
Kenworth top tank
.Top section favors passenger's side and overhangstowards the engine. One 3/4" NPT flange underthe overhang on the passenger's side, a 1" NPT flangeon the lower section of the tank facing up on the driver's side, three 1/4" NPT flanges, a bracket on the top, and a flange with 6 holes threaded #10-32 on top slope oftank for access to check valve. One hole for fillerneck. Learn More -
Kenworth top tank
This tank is the same as tank #5992, except that the hose connection is on the passenger side instead of the driver side.
Learn More -
Kenworth top tank
This tank is the same as tank #5992 except that the 2 1/2" diameter hose connection goesup and towards the center. Learn More -
Kenworth top tank
This tank has a 2 1/2" diameter hose connection on the drivers sidestraight out towards the engine, three 1/4" NPT flanges, a3/4" NPT flange on the passenger side facing straightdown, a bracket on top, and a hole for a filler neck. Learn More -
Kenworth top tank
Same as tank #599LF, except with a 1" diameter hoseconnection between the 4th & 5th bolt holes frompassenger side (facing engine). Learn More