Top Tank
-
GMC top tank
This tank has twenty-five 5/16" NC threaded holes in the built-in baffle, a 1" diameter hose connection straight down fromthe baffle on the passenger side, two bolt-on type flanges with two 3/8" NC threaded holes in each, and two 1/2" a3/8" and a 1/4" NPT flange. The top front corners of the tank are cut lower, and there are two cut-outs across the top of the tank. There is a 1 1/4"hole for a filler neck on the sloped cut-out on the passenger side.
Note : Bolt-on hose connection(s) and/or flat plate(s) available for this tank - must be requested. #7581 - Blank plate #7582 - Plate with 2 1/4" hose connection,2 1/2" long Learn More -
MCI Bus top tank
This tank has a 2 1/4" diameter hose connection, a bracket and two 1/4" NPT flanges on the top of the tank, and a baffle across the width of the tank 11 1/2" from the end of the tank.
Note: this tank pairs with bottom tank #7511. Learn More -
Bus top tank
This tank has a bolt-on flange with two 7/16" NC threads,a 3/8" NPT flange, and an angle bracket in the centerwith a 1/2" diameter hole.
Note: this tank pairs with tank #751. Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two 3/8" NC threaded holes next to the filler opening, and a 1/4" NPT flange on the end of the tank.
Note: pairs with tank #749. Learn More -
Bus top tank
This tank has a bolt-on type flange with two 3/8" NC threadedholes, two 3/8" NC threaded holes next to filleropening, and two 1/4" NPT flanges.
Note: pairs with tank #747 & #7471. Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two 3/8" NC threaded holes next to the filler opening, two 7/16" NC threaded holes at the end of the tank, three5/16" NC threads along one side of the tank, two blocks with two 1/4" NC threaded holes on the opposite side ofthe tank.
Note: pairs with tank #745. Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two 3/8" NC threaded holes next to the filler opening, two 1/4" NPT fittings, and a deflector plate underthe filler.
Note: pairs with tank #743. Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two, 3/8" NC threaded holes next to the filler opening, and two 1/4" NPT flanges.
Note: pairs with tank #741 & #7411. Learn More -
Peterbilt tank
This tank has a 2 1/2" hose connection that comes out at the bottom of the tank then bends 90o, a 1/4" NPT flange for a drain cock, and a PTO cut-out in the center of the tank.
Note: bolt pattern is the same as a #514 or a #800
Learn More -
Peterbilt top tank
This tank is the same as tank #709,except that there is a baffle welded inside the header 18 1/4" from the drivers side of the tank.
Learn More