Top Tank
-
Champion Grader top tank
This tank has a Wabco fill neck (sold separately) in the top centerof the tank, a 2 1/4" hose connection 2 3/4" long, a 1/4 NPT flange inthe center of the tank facing the engine, and a 3/8" overflow tubevent. The overall height of this tank is 4" (not including the fillneck).
Learn More -
Gillig Bus Top tank
This tank has a 3" diameter hose connection that comes down and out on a 90o angle, and a 1/4" NPT flange for a drain cock.
Note: pairs with top tank #051208A Learn More -
Gillig Bus top tank
This tank has a 2" diameter hose connection, and two 3/8" NPT flanges on top. Learn More -
Top
Top tank has a 3" nipple 4 1/2" from the edge of the tank to the center of the nipple, a 1 1/2" fill neck hole on the top center, and threaded bars on each end to mount the side frames.
Bottom
Bottom tank has a pair of 3" nipples 4 1/2" in from both ends to the center of the nipples, threaded bars on each end to mount the side frames, and a baffle that runs widthwise at the center of the tank.
Learn More -
Cat top tank
This tank has a bolt-up type flange with four 3/8" NC threaded holes, located in the center of the tank, to accommodate a 2 1/2" diameter hose connection. There are threaded bars welded along the header, each with four 3/8" threaded holes, a 1/4" NPT flange to accommodate a sensor, a raised filler neck hole in the top center of the tank, a large opening with a threaded stud in the center (typical Cat filler assembly), and a threaded bung on each end each with 5/8" NC threaded holes (for lifting the radiator).
Note: for this tank, a sample must be supplied by the customer.
Learn More -
Oshkosh side frame
This side frame has four 5/16" NC threaded nuts along the edge, three 5/16" threaded nuts along the opposite edge, three 5/16" NC threaded nuts along the back, and an overhang with clearance holes.
Learn More -
Orion 7 Hybrid Bus top tank
This tank has a 2 1/2" hose connection, and a 1/4" NPT flange for an expansion fitting.
Note: this tank mates with bottom tank #091708B Learn More -
Mack top tank
This is almost identical to tank #667, except it has been modified to accommodate a charged air cooler. Also, the 1" diameter bypass hose has been eliminated as well as the three threaded holes in each corner of the tank.
Learn More -
MCI Bus bolt-on tank
This tank has a 2" diameter hose connection, and two 1/4" NPT flanges.
Learn More -
Dodge bolt-on top tank
This tank has a bolt-on style flange for the hose connection, a 1 1/4" hole on the top for a fill neck, a 3/4" NPT coupling, a 1/4" NPT flange, and a deairation baffle.
Learn More