Top, Btm and Frames
-
Complete bolt-on rad set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter fill line, two 1/2" NC threaded nuts, two 1/4" NPT flanges, and a hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NC threaded hole at each end for mounting, two 1/2" NPT flanges (one for a drain on the bottom, and one facing the engine), and two 10 plate oil coolers with 18" centers (1018PC).
Side Frames
These frames have eleven 3/8" diameter clearance holes in the flange, and five 5/16" NC threaded nuts. Frames are 33 5/8" long.
Note: this rad set is supplied with four washer bars 37" long with 21 bolt holes.
Learn More -
Hovercraft complete bolt-on set
Top Tank
This tank has a 3 1/2" diameter hose connection, two angle brackets on each end with two 7/16" diameter holes to mount side frames, and a 3/8" NPT coupling for an expansion fitting.
Bottom Tank
This tank has a 3 1/2" diameter hose connection, two angle brackets on each end with two 7/16" diameter holes to mount side frames, and a 1 1/4" NPT fitting as a filler neck.
Sides
These rails have eight 7/16" x 1" slotted holes to accommodate bolts, two 7/16" diameter holes in the center for the cross bars, a 3/4" diameter hole for access to the overflow tube (top frame only), and one access hole for the 3/8" NPT fitting and one access hole for the 1 1/4" NPT fitting (top frame only).
This set comes with four long and four short washer bars, and the fill neck plug, and the 51" threaded cross bars. Learn More -
Hovercraft complete bolt-on set
Top Tank
Thistank has a 3 1/2" diameter hose connection, two angle brackets on eachend with two 7/16" diameter holes to mount side frames, and a 3/8" NPTcoupling for an expansion fitting.
Bottom Tank
Thistank has a 3 1/2" diameter hose connection, two angle brackets on eachend with two 7/16" diameter holes to mount side frames, and a 1 1/4"NPT fitting as a filler neck.
Sides
These railshave eight 7/16" x 1" slotted holes to accommodate bolts, two 7/16"diameter holes in the center for the cross bars, five 3/8" diameter holes along each edge, a 3/4" diameter holefor access to the overflow tube (top frame only), and one access holefor the 3/8" NPT fitting and one access hole for the 1 1/4" NPT fitting(top frame only).
This set comes with four long and four short washer bars, and the fill neck plug, and the 41 3/4" threaded cross bars. Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1" diameter hose connection, two 3/4" NPT couplings, a 1 3/4" diameter hole for a filler neck, and a deairation baffle.
Bottom Tank
This tank has a 2 3/4" diameter hose connection.
Side Frames
These frames are 38" long and 10 1/4" wide. There are three 3/8" diameter clearance holes in the flange, six 5/16" NC threaded holes in the flange, four 5/16" NC threaded holes along each edge, and five 5/16" NC threaded holes on the back.
Washer Bars
Two @ 28" x 1" x 1/8" - 14 bolt holes
Two angled bars 36" long - 14 bolt holes
Learn More -
Fire Truck bolt-on complete set
Top Tank - #092012A
A 2 1/4" hose connection 9" from the edge of the tank to the edge of the hose connection that comes out the top and angles 90o towards the engine, three 1/4" NPT flanges on the surge tank, and a 1" diameter hose connection angled downwards below the surge tank.
Bottom Tank - #092012B
A 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom for a drain fitting, and oil cooler holes @ 18" centers.
Side Frames - #092012C (left) and D (right)
HDR: 7 1/4" x 7" - 6 BH - 39 5/8" tall.
Two 1/2" NC and two 1/4" NC threaded holes along the back, three 1/4" NC threaded holes along the edge on the engine side, four 1/4" NC threaded holes along the edge on the grill side.
Bolt pattern matches tank #748.
Learn More -
Gen Set complete set
Top Tank
This tank has a 2" diameter hose connection, a 1" diameter hose connection, two 1/2" NPT flanges (one on the hose connection), a 1/4" NPT flange, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two 5/8" NC threaded mounting rods @8" centers, and a 1/4" NPT flange.
Side Frames
These frames are 37 5/8" long, and have twelve 5/16" threaded holes along one edge, and two along the opposite edge.
Washer Bars
4 bars - 27 7/8" x 1" x 1/4" - 14 BH
Learn More -
Generator complete rad set
Top and Bottom Tanks
This Generator tank set has a top and bottom tank which areidentical to each other, with the exception that the top tank has afill neck hole in the top center of the tank. The tank has a 2"diameter hose connection 4" long, placed 3 1/2" in from the edge of thetank to the center of the hose connection, and two threaded bars ateach end of the tank for mounting purposes. There are two 3/4"NPTflanges @ 18" centers to accommodate sensors, ect.
Side Frames
These 25 3/4" tall side frames have 5 bolt holes at each end.
Learn More -
Pearce Fire Truck complete tank set
Top Tank
This tank has a pair of 2 3/8" diameter hose connections, a mounting bracket at the front center of the tank, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a pair of 1/2" NC bolts 3" long @ 30" centers for mounting, a 3" diameter hose connection, a 1 3/4" diameter hose connection, and a 3/8" NPT plug for draining.
Side Frames
These frames have five 3/8" NC threaded holes on the back for mounting the frames, and ten 5/16" threaded holes along the sides for mounting the shroud.
Note: this set comes supplied with two 3/8" threaded tie rods 50" in length, and four washer bars that fit between the side frames.
Learn More -
Crane Carrier complete set
Tanks
Both of these tanks are identical. They have a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange of the end of the tank.
Frames
These frames are 35" long, with two 3/4" studs 2" long on the one frame.
Note: for this set, samples must be provided by the customer.
Learn More -
Gen Set bolt-on complete set
Top Tank
This tank has a 2" diameter hose connection 7" in from edge to center, a 1" diameter bypass connection 14" in from edge to center, and a 1/4" NPT flange for an expansion tube.
Bottom Tank
This tank has a 2" diameter hose connection 9" in from edge to center, amd twp 1/4" NPT flanges for drain fittings.
Side Frames
These frames have four 5/16" threaded nuts along the fan and grill side, and eight 3/8" diameter bolt-holes in the flange.
Comes with four washer bars - 23 3/4" long - 13 bolt holes
Learn More