Top, Btm and Frames
-
DML bolt-on complete set
Top Tank
This tank has a 3 1/2" diameter hose connection, a 3/4" NPT coupling on the engine side, a 1/2" NPT coupling on the grill side, a 1" diameter bypass hose, and two mounting brackets on the top.
Bottom Tank
This tank has a 3 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two mounting brackets on top.
Side Frames
There are six side frames with this set with three different configurations of bolt-pattern along the edge. 33 7/8" in length.
Washer Bar Set
16 bars - 15 3/16" x 3/4" x 1/4" - 11 BH
12 bars - 8" x 3/4" x 1/4" - 5 BH
4 bars - 8" x 3/4" x 3/4" - 5 threaded holes @5/16" NC
Learn More -
DML bolt-on complete set
Top Tank
This tank has a 2" diameter hose connection, a 3/4" NPT flange on the engine side, two 1/2" NPT flanges on the grill side, a baffle separating the tank from left to right, and two mounting brackets on the top.
Bottom Tank
This tank has a 2" diameter hose connection, two 1/4" NPT flanges for expansion fittings, a baffle separating the tank from left-to-right, and two mounting brackets on the top.
Side Frames
There are six side frames with this set with three different configurations of bolt-pattern along the edge. 33 7/8" in length.
Center Bar
Two center bars per unit.
Washer Bar Set
16 bars - 17 5/8" x 3/4" x 1/4" - 11 BH
12 bars - 8" x 3/4" x 1/4" - 5 BH
4 bars - 8" x 3/4" x 3/4" - 5 threaded holes @5/16 NC
Learn More -
Bolt-on complete tank set
Top Tank
This tank has two 2" diameter hose connections 2 3/4" long and separated by a baffle, a 1/4" NPT flange for an expansion fitting, and a threaded mounting block on each end for attaching side frames.
Bottom Tank
This tank has a 1/4" NPT fitting for a drain cock, and threaded mounting blocks on each end of the tank.
Side Frames
These frames have four 1/2" wide by 1 1/4" long slotted holes for bolting side frames to the tank.
This set comes with four long washer bars and four short washer bars.
Note: to build this set samples must be supplied by the customer.
Learn More -
Bolt-on complete tank set
Top Tank
This tank has two 3/4" NPT couplings separated by a baffle, a 1/4" NPT flange for an expansion plug, and threaded mounting blocks on each end for attaching side frames.
Bottom Tank
This tank has a 1/4" NPT flange for a drain cock, and threaded mounting blocks on each end for attaching side frames.
Side Frames
These frames have four 1/2" wide by 1 1/4" long slotted holes for bolting on the side frames to the tanks.
This set comes with four long washer bars and four short washer bars.
Note: for this set, samples must be supplied by the customer.
Learn More -
International complete rad set
Top Tank
This tank has a 2 3/4" diameter hose connection 3" long, a 1/4" NPT flange, and a 1 1/4" diameter hole in to top center of the tank for a filler neck.
Bottom Tank
This tank has a 2 3/4" diameter hose connection 3" long, and two 1/4" NPT flanges for drains.
Side Frames
These frames have 11 bolt holes, and a bracket for mounting with a 5/8" diameter hole.
Note: this rad set is supplied with four washer bars 17 1/4" long with 11 bolt holes.
Learn More -
International complete rad set
Top Tank
This tank has a 2 3/4" diameter hose connection 3" long, a 1/4"NPT flange, and a 1 1/4" diameter hole in the top center of the tank for a filler neck.
Bottom Tank
This tank has a 2 3/4" diameter hose connection 3" long that points downwards, and a 1/4" NPT flange for a drain cock.
Side Frames
These frames have 11 bolt holes, a mounting bracket with a 5/8" diameter hole, and a bracket along the fan edge to mount the shroud with a slotted hole on top for bolt clearance.
Note: this rad set is supplied with four washer bars 17 1/4" long with 11 bolt holes, and two CAC mounting brackets.
Learn More -
Cummins 8.3 complete rad set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 3/4" diameter bypass hose, two 1/4" NPT flanges, two 1/2" diameter flanges for sight glasses, and a 2" diameter pipe on the top for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and three 1/4" diameter flanges.
Side Frames
These frames are 44 7/8" long and 9" wide. There are slotted mounting holes top and bottom, and two bolt holes on the bottom.
Note: this set comes supplied with four long and four short washer bars.
Learn More -
Hovercraft complete set
Top Tank
This tank has two 2 1/2" diameter hose connections 12 3/8" long, a 1/2" NPT flange for a fill line, a 1/4" NPT coupling for an expansion line, a mounting ear on each end to attach side frames, and a baffle separates the two hose connections.
Bottom Tank
This tank has a 1/2" NPT flange for a fill line, and a 1/4" NPT coupling for an expansion fitting.
Side Frames
These frames have eight slotted mounting holes, six 3/8" diameter holes to attach a second complete unit (OEM #HV003 or set #081409B), and holes to access the 1/4" NPT fittings on the tanks.
SAMPLE REQUIRED
Note: this set comes supplied with four washer bars 7 1/2" long with 5 bolt holes, and four washer bars 33 1/8" long with 16 bolt holes.
Sample Required
Learn More -
Hovercraft complete set
Top tank
This tank has two 1 5/8" diameter hose connections separated by a baffle, a 1/4" NPT coupling for an expansion fitting, a 1/2" NPT flange for a fill line, and a mounting ear on each end to attach frames.
Bottom Tank
This tank has a 1/4" NPT coupling for an expansion fitting, a 1/2" NPT flange for a fill line, and a mounting ear on each end to attach frames.
Side Frames
These frames have eight slotted mounting holes, six 3/8" diameter holes to attach to another complete unit (OEM #HV004 or set #081409A), and holes to allow access to the 1/4" NPT fittings.
Note: this set comes supplied with four washer bars 7 1/2" long with 5 bolt holes, and four washer bars 33 1/8" long with 16 bolt holes.
SAMPLE REQUIRED
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 1 3/4" diameter hole for a filler neck, and two studs on each end to attach the side frames.
Bottom Tank
This tank has two 1" threaded pipe connections separated by a baffle, and two studs on each end to attach side frames.
Side Frames
These frames have four 5/8" diameter holes for the studs on the tank, two 5/8" diameter holes along each edge, six 3/8" diameter holes along each edge, and two holes in the base plate to bolt to the ground.
Comes with four long and four short washer bars.
Dim: 8 1/4" with 5 BH
24 1/4" with 12 BH
Learn More