Top, Btm and Frames
-
Gen Set bolt-on complete set
Top Tank
This tan has a 1 3/4" diameter hose connection 6 3/4" long, a de-airation baffle, a 3/4" NPT fitting for a bypass hose, a 3/8" NPT flange for a sensor fitting, and a 1/4" NPT flange for a vent line.
Bottom Tank - HDR: 23 3/8" x 7"
This tank has a 2 1/4" diameter hose connection, a 3/8" NPT flange for a sensor fitting, two 5/8" NF mounting studs @ 12" centers, and a 3/4" NPT fitting for a fill line.
Side Frames
These frames are 21" long, with 3 5/16" NC threaded holes along each edge.
Washer Bars
14 1/4" x 1" x 1/4" - 7 BH - 4 per unit
Learn More -
Bolt-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass connection, two 1/4" NPT flanges for sensors etc, a 1/2" NPT flange on the grill side for a sight glass, and two 1/2" NC threaded holes on each end for lifting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange, two 10 plate oil coolers with 18" centers (1018PC), and two 1/2" NC threaded holes for mounting.
Side Frames
These frames have five 5/16" threaded holes along each side for mounting the shroud, and a block with two 1/2" NC threaded holes for mounting.
Note: this set is supplied with four long washer bars.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 1 3/4" diameter hole on the top center to accommodate a truck filler neck, a 2 1/4" diameter hose connection, a 1/8" diameter bypass hose, a de-aeration baffle, and a curved bar with threaded holes to attach the engine cover.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 3/4" NPT flange for drainage, and four 5/8" NC nuts for mounting.
Side Frames
These frames have a 9 bolt hole flange, five 5/16" NC bolt holes run along the width, a 3/8" NC nut is in the back center of the frame, two 5/16" NC nuts are on the back edge, four 5/16" NC nuts run along the fan side, and three 5/16" NC nuts run along the grill side.
Note: this set comes supplied with brackets - two bolt holes on one face, and one hole with 1/4" NC nuts.
Samples must be supplied by the customer.
Learn More -
Bolt-on complete set
Top and Bottom Tanks
Both tanks are the same. They have a 2 1/2" NPT coupling, and a 1/4" NPT flange.
Side Frames
These frames have flanges that are 7 7/8" wide x 6" deep, and they have two 1/2" NC threaded holes to accommodate lifting hooks.
Note: this set is supplied with four washer bars 30 3/8" long with 15 bolt holes.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange to accommodate an expansion tube.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange to accommodate a drain cock.
Side Frames
These frames are 31 11/16" long, and have four 5/16" NC nuts along the fan and grill side. Flange has eight 3/8" diameter bolt holes.
Note: this set comes supplied with four washer bars 24 7/8" long with 13 bolt holes.
Learn More -
Bolt-on complete set
Top Tank
This tank has a 4" NPT coupling, a hole for a filler neck in the top center of the tank, and four 1/2" NC threaded holes at each end of the tank to attach the side frames.
Bottom Tank
This tank has a 4" NPT coupling, a 3/4" NPT coupling for a drain, and four 1/2" NC threaded holes at each end of the tank to attach the side frames.
Side Frames
These frames have eight holes to accommodate 1/2" bolts to attach to the tanks, a hole to accommodate a lifting hook, two holes in the foot plate to attach to a mounting block, and a series of 3/8" diameter holes.
Note: this set comes supplied with four washer bars 66" long with 33 bolt holes, and four washer bars 7" long with 5 bolt holes.
Learn More -
Gen Set complete solder-on set
Top
This tank has a 3 1/2" diameter hose connection, and two 1/2" diameter vent tubes in the top of the tank.
Bottom
This tank has a 3 1/2" diameter hose connection, a 1 1/2" diameter hose connection for a bypass, and two 1/2" NPT couplings for drainage.
Side Frames
These frames have 6 slotted holes along each side of the frame to attach the shroud / finger guards, four removable gussets, a mounting bracket on the back of the frame with a 1 3/4" diameter hole, and five 3/8" diameter holes on each end.
Washer Bars
Comes with four washer bars - 1/4" x 1 1/4" x 49" inches long - 25 BH
Learn More -
Hay Grinder bolt-on complete set
Top Tank
This tank has a 1" diameter hose connection, a 1 1/2" diameter hose connection, two baffles 13" from each end, a 1/4" NPT flange, and a 1 1/8" diameter hole for a fill neck.
Bottom Tank
This is a blank tank with a baffle in the center, and two 1/4" NPT flanges for drain fittings.
Side Frames
50" long.
Comes with four washer bars - 1/4" x 1" x 38 1/2" - 19 BH
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has two 3" diameter hose connections, four 1/4" NPT flanges, two 3/4" NPT couplings for bypass, a hole for a filler neck, two bars with 1/2" NC threaded holes at each end to attach side frames, and a deairation baffle.
Bottom Tank
This tank has two bolt-on type flanges, two 3/4" NPT couplings for drain fittings, and two bars with 1/2" NC threaded holes at each end to attach side frames.
Side Frames
These channel type side frames are 75" long and 7 3/8" wide. There are two 3/4" diameter holes in the base plate at each end, two holes for lifting, six slotted holes along one edge, and six clearance holes along the opposite edge of the slotted holes.
Learn More -
Bolt-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange to accommodate a hose barb, and a 1/4" NPT flange for a drain.
Side Frames
These frames are 26" tall, and each flange has eight bolt holes.
Note: this complete tank set is supplied with four washer bars 19 3/8" long with 10 bolt holes.
Sample Required Learn More