Tank
-
Crane bolt-on tank
This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain fitting, and four 1/2" NC threaded nuts @ 19 3/4" centers for mounting.
Learn More -
Bus bolt-on tank
This tank has a 2" diameter hose connection, a 3/4" NPT coupling on one end, and a 1/4" NPT flange on the top. Tank tapers from one end to the other.
Learn More -
John Deere tank
This bottom tank has a 2 3/4" diameter hose connection 6 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom 9" from the edge of the tank, and 2 large mounting brackets at the back.
Front and back views shown here.
Learn More -
New Flyer Bus bolt-on tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain/expansion fitting.
Learn More -
Bolt-on core-testing tank
These tanks are used for core testing, and have a 1/4" NPT flange on top to allow for a pressure line.
Learn More -
Hydraulic Tank
This hydraulic tank has a 1/2" NPT fitting on the bottom of the tankfor a drain, two 1/2" NPT fittings on the front of the tank, a 3/4" NPTfitting on the front of the tank, a 1 1/4" NPT nipple on the front ofthe tank, a bolt-on flange on the top of the tank with ten 5/16" NCthreaded studs, and two mounting feet on each side - each with two 3/8"diameter holes for bolting down.
Learn More -
This tank has a 2" diameter hose connection, a 1" diameter bypass, two 1/4" NPT flanges, a 1/2" NPT flange for a sight glass on the grill side, a stand pipe for a fill neck, and a deairiation baffle. Learn More -
1946 Welland Tractor bolt-on top tank
This tank has two 2 1/8" diameter hose connections, two 1/4" NPT flanges, a 1" diameter bypass hose, a 1 1/4" diameter hole for a fill neck, a 1/2" NPT flange for a sight glass, a deairation baffle, and a row of threaded 5/16" NC threaded nuts to bolt to the header.
Note: samples are required to reproduce this particular set.
Learn More -
Bolt-on blank tank
This is a blank tank with large brackets roughed in on the top. Customer to finish the bolt holes, etc, to accommodate the application.
Learn More -
Hydraulic Tank
This hydraulic tank has two 1/2" NPT flanges for sight glasses, two 3/4" flanges for hydraulic fittings, a 1" NPT flange for a hydraulic fitting, a 1 1/4" NPT flange for a hydraulic fitting, a fill pipe, an access cover plate, an access hole with threaded nuts, a 3/4" NPT flange for a drain, four feet with slotted holes for mounting (two feet are inset from the others), a 1 1/4" NPT flange for an oil filter to screw into, and a baffle inside the tank to reduce sloshing. Learn More