Side Frame
-
Western Star side frame
This frame has a 5/16" NC threaded nut in each gusset, two "ears" with 3/8" threaded nuts to mount CAC, two 1/4" NC threaded holes along the same edge of the "ears" and four !/4" NC threaded holes along the opposite edge, and 14 3/8" NC threaded holes an the back of the frame.
The flanges have 12 bolt holes - eight 3/8" diameter clearance holes, and four 5/16" NC threaded holes.
Learn More -
AutoCar side frame
This frame is 37 7/8" long. It is similar to frame #526, except that there is less of an overhang, and there is an additional bracket welded on the side.
There are twelve 3/8" NC threaded nuts on the back of the frame for mounting purposes. Left and right are mirror images of each other.
This particular frame belongs to an Auto Car garbage truck.
Learn More -
Kenworth side frame
This frame has 12 bolt holes per flange (two threaded 5/16" NC), and various brackets along the back of the frame for mounting a variety of attachments (CAC, condensers, etc...), and there are "ears" on the gussets for mounting an oil cooler.
Note: this frame matches with tank #5911 and tank #6024.
Learn More -
Kenworth side frame
Top and bottom flanges have 12 bolt holes each. There is a "Z" bracket, two "ear" brackets and 2 keyhole brackets for mounting a charge air cooler.
NOTE: Frames are not interchangeable. Order left or right accordingly. (right frame shown here)
Learn More -
Kenworth side frame
Top & bottom flanges each have 12 holes (10 drilledclearance for 5/16" bolts and two threaded 5/16" NC). There is aZ shaped bracket on on the back with a 7/8"diameter hole in the center, two brackets on the side with a 3/4" diameterhole in each, two gussets with keyhole type slots forcross bars, seven 1/4" NC threaded holes along each side, and fourteen 1/4" NC threaded holes on the outside.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs.LATE MODEL Learn More -
Kenworth side frame
Top and bottom flanges consist of 10 holes each, allclearance for 5/16" bolts. Various other holes forbrackets, shrouds, etc.
NOTE: Frames are interchangeable.EARLY MODEL Learn More -
Kenworth side frame
Conventional style - offset headersTop and bottom flanges each have 10 holes (six clearance for 5/16" bolts and 4 threaded 5/16" NC).There are fourteen 1/4" NC threaded holes on the side forbrackets and shroud, and two brackets onthe side each with a 3/4" diameter hole.
Note: frames are not interchangeable. Orderleft for drivers side or right for passengers side orpairs.LATE MODEL Learn More -
Kenworth side frame
Top and bottom flanges have 10 holes each, all drilledclearance for 5/16" bolts. Ten holes on back of frametapped 1/4" N.C. For brackets, etc.
NOTE: Frames are interchangeable.EARLY MODEL Learn More -
Kenworth side frame
Top and bottom flanges have 10 holes each (eight clearance for 5/16" bolts and two threaded 5/16" NC).There are 26 holes on the back threaded 1/4"NC. The grill side is cut lower to allowmore air flow, the engine side is 2" deep.
Note: Frames are interchangeable if there is no Z bracket. If a Z bracket is required frames would notbe interchangeable.LATE MODEL Learn More -
Kenworth side frame
Top and bottom flanges have 10 holes each, all drilledclearance for 5/16" bolts. Various other holes forshroud, brackets, etc.
Note: Frames are interchangeable.EARLY MODEL Learn More